Page 376 - VSI Master Catalog

ALUMINUM ALTERNATOR MOUNTING BRACKET, SMALL BLOCK FORD
• Fits with mechanical water
pumps and electric water pumps from all major manufacturers with V-belt
or serpentine pulley systems.
• Provides an alternative to running the stock serpentine belt set up.
• Kit Includes all mounting hardware. MOR63810 Small Block Ford PULLEYS
CRANK PULLEY SHIM KIT
• Fits: Small and Big Block Chevrolet engines.
• Includes 3 shims per pack, 1/16”, 1/8” and 3/16”.
CAST ALUMINUM CRANKSHAFT PULLEYS
• Extra-deep belt grooves provide added belt retention during rapid changes in engine RPM.
• Small pulley diameter slows fan, water pump, and alternator speed to reduce horsepower-robbing drag.
• High RPM water Pump operation is improved, reducing impeller speed below cavitations threshold.
• Uses 36° x 17/32” Wide V-Belt.
MOR64031
Crank Pulley Shim Kit
SB Chevy
MOR64050
MOR64060
MOR64070
MOR64110
MOR64120
BB Chevy
MOR64200
MOR64210
Ford
MOR64550
Chrysler
MOR64700
68-Earlier, SWP, 30% Reduction, Single Groove Crankshaft 5.25”
68-Earlier, SWP, 25% Reduction, Double Groove Crankshaft 5.40”
68-Earlier, SWP, 50% Reduction, Single Groove Crankshaft 4”
69-Up, LWP, 50% Reduction, Double Groove Crankshaft 4.40”
69-Up, LWP, 30% Reduction, Single Groove Crankshaft 4.95”
68-Earlier, SWP, 30% Reduction, Single Groove Crankshaft 5.25”
68-Earlier, SWP, 25% Reduction, Double Groove Crankshaft 5.40”
351C-400-Boss 302, Double Groove Crankshaft w/4-Bolt Damper 4”
Pre-72, 340-400, 30% Reduction, Single Groove Crankshaft 5”
UNIVERSAL WATER PUMP PULLEY SHIM KIT
• Fits: All GM and Ford water pumps with either a 3/4” or 5/8” shaft.
• Kit provides proper drive belt alignment with water pump.
• Shims are installed between the water pump pulley and drive flange.
• Kit contains two 1/16” spacers and one 1/8” spacer.
MOR64035 Universal Aluminum Water Pump Pulley Shim Kit.
BILLET ALUMINUM CRANKSHAFT PULLEYS
BILLET ALUMINUM ALTERNATOR PULLEYS
• V-Belt Design
• Machined from the highest grade
• V-Belt Design.
• Machined from the highest grade aircraft
maximum durability.
• Deep precision machined grooves
aircraft billet aluminum for
billet aluminum for maximum durability.
• Deep precision machined grooves ensure
ensure belt retention even during
belt retention even during extreme changes in
extreme changes in engine RPM. • When crankshaft and water pump pulleys are used together, water
engine RPM.
• Hard-coat anodized for extended life. • Uses 36o x 17/32” wide belt.
pump speed is reduced by
MOR64051 MOR64111
MOR64201
Single Groove, 30% Reduction, 5.25” O.D. Fits: SBC, 1968-Earlier (With Short Water Pump)
Double Groove, 50% Reduction, 4.04” O.D. Fits: SBC and 90o V6 Chevys, 1969-Later (With Long Water Pump)
Single Groove, 30% Reduction, 5.25” O.D. Fits: BBC, 1968-Earlier (With Short Water Pump)
approximately 30%.
• Hard-coat anodized for extended life.
MOR64870
Billet Aluminum Alternator Pulley. Single Groove, 5” O.D. Use 36° x 1/2” Wide Belt Fits: GM and Ford Alternators with 21/32” Dia. Shaft
ALTERNATOR PULLEYS
ALUMINUM EXPANSION TANKS
• Features a robust billet aluminum filler neck, fittings and power steering tabs.
• Increased coolant capacity over stock.
• Single groove V-belt design
• Large diameter reduces alternator speed
for high engine RPM applications.
• Machined from high grade, lightweight
aluminum to reduce alternator
MOR63497 MOR63767 MOR63768 MOR63782 MOR63786 MOR63787
05-Up Challenger/Charger 2.7-6.1L 96-04 Mustang
05-10 Mustang V6/GT, 07-Up GT500 05-10 Mustang w/Built-in Ovrflw Reserv. 86-93 Mustang
97-04 Chevy Corvette
bearing loads.
• Deep groove helps retain V-belt at high RPM. • Uses 36° x 17/32” V-belts.
MOR64800 5.00” O.D. Fits: For GM and Ford Alternators with 21/32” Dia. Shaft
MOR64840 5.00” O.D. Fits: Chrysler to 1971
374