Page 378 - VSI Master Catalog

WOOD DESIGN CARBURETOR SPACERS
• Can be used individually or stacked without the use of gaskets.
• Top-quality hardwood has a sheet of phenolic resin-impregnated paper bonded to both sides.
SUPER COOL CAN
• Reduce fuel temperature for a denser air/fuel ratio.
• Decrease fuel temperature 20% more than other cans on the market.
• The lid is held on with a wing nut and gasket for a leak- proof seal, and they’re NHRA approved for competition.
• Includes 2 stainless steel straps, T-bolt clamps, and a lightweight aluminum bracket for easy mounting.
• Not for use w/ high-pressure fuel systems. MOR65125 Super Cool Can
NYLON FLOAT BOWL WASHER KIT
• Nearly indestructible nylon replacement washers are unaffected by fuel, and won’t leak or break down under
normal usage.
MOR65015 MOR65016 MOR65017 MOR65018
4150/4160 1/2” Open 4500 1/2” Open
4500 1/2” 4-Hole Quadrajet 1/2” Open
ALUMINUM CARBURETOR ADAPTERS
MOR64964 MOR64965
MOR65000
1” Billet Aluminum, adapts Holley
No. 4412 style to a 4150 4 bbl.
Square Flange Manifold.
Carburetor Adapter, 3/4” Billet
Aluminum, Adapts Holley 2300/
2305 2 bbl. Carburetors to Intake Manifolds with Holley 4150/4160 4 bbl. Bolt Pattern, 2-hole Plenum Design with 1.50” Dia. Bores.
Carburetor Adapter, 2” Cast Aluminum, Adapts Holley 4500 Dominator Carburetor to Holley 4150/4160 Intake Manifold Bolt Pattern
• 10/pk MOR65225
Float Bowl Washer Kit, For Holley Carbs
CARBURETOR SAFETY PLATE
• Fits Holley Dominator 4500-series Carbs. • Prevents linkage that may become loose from carburetor from falling into intake.
• Steel, plated clear zinc. MOR64935 Dominator
THROTTLE STOP
FUEL PUMP BLOCK-OFF PLATES
• Designed to block off the fuel pump mounting boss when a mechanical fuel pump is not used.
• Available in two popular styles.
• Made of anodized aluminum or high
• For 4150-Series Carburetors
• Prevents excessive side loading on the
MOR65391 MOR65392
MOR65393 MOR65394
Anodized Aluminum, SBC
Anodized Aluminum, BBC, 273-440 Chrysler and All Fords Except 351C, 351M and 400
Chrome Plated Steel, SBC
Chrome Plated Steel, BBC, 273-440 Chrysler, and All Fords Except 351C, 351M and 400
luster triple chrome plated steel.
throttle shaft.
• Throttle stop is adjustable, and simply
BILLET ALUMINUM FUEL PUMP BLOCK-OFF PLATES
• Includes gaskets and stainless steel
mounts to the carb hold-down stud.
• Made from rugged 1/8” steel with a clear zinc finish. • Fits both 1:1 and progressive throttle linkages.
• Ideal for all types of racing.
socket head screws. • Black Anodized.
MOR65042 Throttle Stop, Fits 4150-style Holley Carbs
CARBURETOR WEDGE PLATE
MOR65395 MOR65396
SBC
BBC, 273-440 Chrysler, and All Fords Except 351C, 351M and 400.
• .830” thick at its thickest point.
• To keep carburetor float-bowls “level”
FUEL PRESSURE GAUGE FITTINGS
• Allows easy plumbing up to 1/8” NPT fuel pressure gauge lines.
• Saves wear and tear on carb inlet fittings by allowing quick and easy disconnecting of fuel line.
• Anodized aluminum.
during acceleration, some amount of
mounted carburetor angle is necessary. • Moroso’s wedge plate tilts the carburetor
forward 5° to provide the optimum angle during quick acceleration and front-end lift.
MOR65030 Fits Standard Holley Bolt Pattern
ALUMINUM FUEL BLOCK KITS
• Each has a 1/8” NPT provision for a fuel pressure gauge and a socket head pipe plug if a gauge is not used.
MOR65300 MOR65310 MOR65315 MOR65360
-6AN Male to -6AN Male
3/8” NPT Female to 3/8” NPT Male 3/8” NPT Male to -6AN Male
3/8” Line with Hose Fitting
MOR65160 MOR65170
376
1/2” Hose Inlet with Two 3/8” Hose Outlets 1/2” Hose Inlet with Two 1/2” Hose Outlets
MOR65375 MOR65380 MOR65390
1/4” NPT to 3/8” Hose, One Per Package 3/8” NPT to 3/8” Hose, Two Per Package 3/8” NPT to 1/2” Hose, Two Per Package
FUEL HOSE FITTINGS
• Handy brass fittings can be used on electric fuel pumps and regulators.