Page 377 - VSI Master Catalog

ALUMINUM BRAKE RESERVOIR COVERS
• Fabricated out of .100 thick aluminum and have Tig-welded corners.
• Cover fits over factory brake reservoir tanks.
MANIFOLD MOUNTED CHEVY V6/V8
• Provides positive throttle return required by several sanctioning bodies.
• Each kit fits Holley 2 or 4-bbl. single carb applications.
• Includes one set of return springs.
MOR74221 MOR74222 MOR74229 MOR74240 MOR74246 MOR74248
05-08 Mustang 05-Up Mustang 96-04 Mustang 97-08 Corvette 10-Up Camaro 10-Up Camaro SS
MOR64925 MOR64926
SBC and 90° V6 Chevy,
Manifold Mount, 1-13/16” Tall BBC, Manifold Mount, 1-13/16” Tall
THROTTLE CABLE
MOUNTING KIT AND ACCESSORIES
THROTTLE CABLE MOUNTING KIT
• These kits come with a Morse-style throttle cable bracket, a universal return spring assembly, and all necessary installation hardware.
• 4-hole under-carb design provides the security of a linkage safety plate.
• These accessory brackets bolt to the plate separately instead of stacking up on the carb studs.
• This allows access for easy carb servicing and the
option of additional accessories, while providing clearance to linkage.
THROTTLE RETURN SPRINGS
• Pack of two stainless steel springs can be used as spares or replacements for Moroso throttle return spring kit MOR64925, MOR64926 and
Throttle Return Springs
BILLET ALUMINUM CARBURETOR SPACERS
• Open plenum spacers will help to increase high-rpm power, while 4-hole spacers help to increase midrange torque.
• The spacers are available in aluminum, phenolic, plastic, and wood.
MOR64928. MOR64929
MOR65047
Throttle Cable Mounting Kit
INSULATING PLASTIC AND PHENOLIC CARBURETOR SPACERS
• Advanced plastic and phenolic
MOR64951 MOR64981 MOR64985 MOR64996
4500 1” Open Plenum Design 4150/4160 1” Open Plenum Design 4150/4160 1/2” Open Plenum Design 4150/4160 1” 4-Hole Plenum Design w/ 1.750” Dia. Bores
THROTTLE RETURN SPRING KITS
compounds are specially formulated to reduce heat conductivity 10 times greater than aluminum.
• Insulating phenolic spacers come pre- drilled for alignment pins
• Gaskets not included.
• Clears most air cleaner combinations and can be used with dual carbs.
• Made from sturdy 14-gauge steel
and finished in handpolished chrome. • Kit includes heavy and light sets
of stainless steel return springs,
all mounting hardware, and complete installation instructions.
MOR64930
MOR64940 MOR64943
MOR64947
4150/4160 1” 4-Hole Plenum Design with 1.75” Dia. Bores, Plastic
4150/4160 1” Open Plenum Design, Plastic 4150/4160 1/2” 4-Hole Plenum Design with 1.75” Dia. Bores, Phenolic
4500 1/2” Open Plenum Design, Phenolic
MOR64923 MOR64927
Holley 4500, Carb Mount
2300/4100 Holley Series, Road, Speed, Race Demon Series Carb Mounts
CARBURETOR LINKAGE BUSHING SET
• Allows the fitting of a 1/4” fastener to
CAST ALUMINUM CARB SPACERS
• Can easily be mounted with one of the Moroso Carburetor stud kits MOR37950, MOR37960 or MOR37961.
• Increases plenum volume for high RPM power.
• Four-hole carb spacers increase mixture velocity for
the 1/2” dia. hole found in the throttle
installation and eliminates the
sloppiness present when rubber bushings are used. • Gold iridite steel finish.
MOR64920 Carburetor Linkage Bushing Kit
more midrange torque.
linkage plate of Holley 4 barrel carbs. • Split bushing design permits simple
MOR64950 MOR64970
4500 1” Open Plenum Design 4150/4160 2” Open Plenum Design
375