Page 375 - VSI Master Catalog

WATER NECK BLOCK-OFF PLATE
• 1/4” aluminum plate provides an ideal base to weld on.
• Two pre-drilled mounting holes ensure a perfect fit
TANKS
COOLING SYSTEM EXPANSION TANKS
• Available with rugged 6061-T6 billet aluminum filler necks welded to the tank to withstand the continuous removal and installation of the cap.
• They’re 100% pressure- tested to eliminate leaks, and they accept a standard-size radiator cap (not included).
MOR63471
Chevrolet V8 & 90° V6
REMOTE THERMOSTAT HOUSINGS
• Locates the filler neck at the highest point of cars with low mount radiators to bleed air.
• Can be flipped 180° for either a left or right outlet location.
• Gaskets, bolts washers, and a standard-size radiator cap filler neck are included.
MOR63650 MOR63651
Expansion Tank, Stamped Filler Neck, 1-1/2 qt. Capacity, 3-5/8”D
Expansion Tank, Billet Filler Neck, 1-1/2 qt. Capacity, 3-5/8” D
MOR63425 MOR63426
Inlet Ports on Bottom Inlet Ports on Each Side
ALTERNATOR MOUNTING KITS
• Stout construction keeps your belts in-line under extreme loads and rpms.
• They’re available for a variety of engines and alternator locations.
• Mounting hardware is included unless otherwise noted.
FILLER NECK HOUSING
• Manifold mounted filler neck base allows for various bolt-on style filler necks, plates for both race or street applications.
• Made of 356-T6 cast aluminum 2-5/16” tall. • 1-1/2” water hose outlet.
MOR63825
Alternator Mount Kit, GM Delcotron
MOR63423
Chevrolet V8 & 90° V6 Intake Manifolds
BILLET ALUMINUM
ALTERNATOR MOUNT KITS
• Designed to mount mini ND-style and 93mm
WATER NECK BLEEDER KIT
• Allows you to remove air pockets from your cooling system.
• They include a filler neck housing with a 90° outlet for the upper radiator hose, an aluminum bleeder plate
with a petcock valve, two mounting gaskets, and mounting hardware.
• Can also be used with Moroso’s expansion tanks for maximum cooling performance.
mandrel kits.
• Includes all spacers and hardware.
MOR63430 MOR63431
Water Neck Bleeder Kit, Cast Aluminum Water Neck Bleeder Kit, Billet Aluminum
crank triggers or engine plates. • Alternator mount kits include all
RADIATOR OVERFLOW TANK
• Lightweight Plastic design holds full quart capacity.
• Can be used in many forms of competition: NHRA & IHRA accepted.
• Vented tank includes hose fitting and drain cock.
• Dimensions: 10-1/2” high (overall), 3” tank diameter.
MOR63657 Overflow Tank
designed with spacers that can be replaced with pulleys to drive other accessories such as external oil pumps and vacuum pumps.
alternators to either side of the motor, while
clearing the electric water pump.
• Works with most old and new style drive
MOR63832 MOR63833 MOR63834
BBC, Use with Moroso Pump MOR63547 BBC, Use with CSR Pump
BBC, Use with Meziere Pump
ALTERNATOR MOUNT AND DRIVE KITS ELECTRIC DRIVE PUMPS
• The Drive Kits work with or without
hardware needed to mount old-style
Delco alternators to the driver’s side of the engine. • Alternator drive kits are crankshaft-mounted and
SMALL BLOCK CHEVY
MOR63842 MOR63843
Alternator Mount Kit, SBC
Alternator Drive Kit, SBC, Use MOR97170 Gilmer Drive Pulley if External Oil Pump is Used.
BIG BLOCK CHEVY
MOR63840 MOR63841
Alternator Mount Kit, Big Block Chevy with Early Style Delco Alternator
Alternator Drive Kit, Big Block Chevy, Use MOR97170 Gilmer Drive Pulley if External Oil Pump is Used.
373