Page 374 - VSI Master Catalog

SOLID MOTOR MOUNT
• Fits: 2005-09 Mustang.
• Extra-thick 3/8” steel and billet aluminum. • 125,000 lb tensile strength studs.
• 2/pk
RADIATOR HOSE DRAIN
• Cast aluminum drain adapts the 1-1/4” outlet from the popular VW Scirocco radiator to the 1-9/16” inside diameter
of the standard lower radiator hose found in most Chevys.
• Includes petcock for draining engine coolant. • 100% leak tested.
MOR63700 Radiator Hose Drain
RADIATOR HOSE FILLERS
• 356-T6 cast aluminum Radiator Hose Fillers are spliced into the upper radiator hose to provide more complete cooling system filling.
• Standard size radiator cap receptacle is
welded to the cast flange (radiator cap not included).
• 100% leak tested.
MOR62547
Solid Motor Mount, 05-09 Mustang
MOTOR MOUNT ADAPTER PLATES FOR LS SERIES
• Simple and efficient way to adapt
motor mounts to fit LS series engines.
• Manufactured from 6061 T-6 aluminum.
• Black anodized finish resists corrosion.
• Works with GM factory 3-Bolt mounts and Moroso solid
motor mounts MOR62500, MOR62510, MOR62515 and
MOR62530 and most aftermarket polyurethane mounts. • 2/pk
MOR62555 Motor Mount Adapter Plates for LS Series
CHEVY SOLID STEEL MOTOR MOUNT PAD KIT
• Manufactured from rugged .188” steel on precise CNC machinery for an accurate alignment with existing frame holes.
• Finished with corrosion-resistant zinc plating or chrome-plated steel.
For SBC, BBC, V6 90° Engines
MOR62610 82-92 Camaro/Firebird, Zinc Finish
For SBC Engines
MOR63730 MOR63740 MOR63745
1-1/2” Hose to 1-1/2” Hose 1-1/2” Hose to 1-1/4” Hose 1-1/4” Hose to 1-1/4” Hose
MOR62630
74-81 Camaro/Firebird; 1973-88 Chevelle, Malibu, El Camino, Monte Carlo; 1973-79 Nova; 76-90 Impala, Caprice; Small Block, Zinc and Yellow Chromate Plating (Use with MOR62515).
WATER OUTLET RESTRICTOR KIT
• Red, gold and blue anodized aluminum restrictor plates are mounted under the water outlet on the intake manifold.
• Kit consists of three restrictor plates with 5/8”, 3/4” and 1” I.D. holes for optimum coolant flow, 2-1/8” O.D.
SOLID TRANSMISSION MOUNTS
• Replaces stock, OEM-style mount to eliminate linkage binding, driveline misalignment and unwanted transmission movement in racing and street performance applications.
• Sturdy mount is constructed from 3/16” steel.
FILLER NECKS
• Blue anodized aluminum.
• Bolt-on with AN fittings or standard size
MOR63440
GM V8, GM V6, Ford 260-302, 351W
MOR62600 MOR62602
Solid Transmission Mount, 1958-88 Chevy Except 1982-92 Camaro and Firebird, Fits Powerglide, TH-350, TH-400 and All Borg-Warner,Muncie, Saginaw, Chrysler 4-speed and Doug Nash 5-speed Transmissions.
1987-92 Mustang, T-Bird and Other Ford Models Equipped with A.O.D. 4-speed Automatic or 5-speed Manual Transmissions.
radiator cap.
• Includes gasket.
• 100 % leak tested.
ALUMINUM WATER PUMPS
• Reinforced housing for extra strength. • Includes integral cam stop boss.
MOR63460 MOR63461 MOR63465 MOR63466 MOR63486 MOR63467
MOR63455 MOR63456 MOR63485 MOR63420
Designed for Oval Track Racing, Fits Chevy V8 & V6 -16 AN
Fits Chevy V8 & V6 -16 AN Fitting and Two
3/8” NPT Female
Fits Chevy Bolt-On Stamped Accepts Standard Size Radiator Cap
Fits Chevy Billet Bolt-On Accepts Standard Size Radiator Cap
Billet Aluminum Filler Neck, Weld-On Standard Radiator Cap
Billet Aluminum Filler Extended To 5-3/4” Above Manifold Accepts Standard Size Radiator Cap Fits SB Ford Engines, Bolt-on, -16 AN Fitting Fits: Ford 4.6/5.4L, 2 Valve only engines Weld-On Neck, Made From Stamped Aluminum Fits SB and BB Chevy Engines, Bolt-On,
Cast Aluminum
MOR63500 MOR63505
Small Block and 90° V6 Chevy 5/8” Shaft, 1955-68 “Short” Design
Small Block and 90° V6 Chevy 3/4” Shaft, 1971-’82 Corvette Design
372