Page 363 - VSI Master Catalog

OIL RETURN SCREEN KITS
FITTINGS
FILTER FITTINGS
• Designed to trap metal chips and debris before reaching external or dry sump oil pumps, or rear end lube pumps.
• 304 stainless steel screen uses .015” diameter, 16 mesh wire.
• Easily removed for cleaning.
MOR23960 3/4” NPT to -12 AN Male, One Per Package
• Inexpensive engine insurance! • Traps metal fragments or loose
components resulting from valvetrain failure before reaching vital engine parts.
• Stainless steel mesh screens
are fitted over holes in lifter gallery with supplied epoxy.
MOR25000 MOR25001
SBC. Includes 8 Oil Return Hole Plugs to Redirect Oil to Front/Rear Return Galleries. Includes Filter Screens and Epoxy
BBC. Includes 4 Screens and Epoxy
MOR23961 -12 AN male to -12 AN Male, One Per Package Note: Screen prevents large particles from entering pump when used on inlet side of
OIL HEATING EQUIPMENT/FITTINGS
OIL PREHEATERS
• Heater element designed specifically for heating oil; does not scorch or boil
the oil like “converted water heater” designs.
• 212 watts of power raises temp of 12 quarts of oil 60°F in about 30 minutes.
• Element screws into place; available with aluminum or steel 1” NPT fitting.
• 120 volt rating; includes detachable 7-foot cord.
• Length of heating element is 4-1/2” from fitting to tip.
MOR23980 Internal, Aluminum Fitting
OIL PREHEATER, SELF CONTAINED
• Designed specifically for heating oil; does not scorch or boil the oil like “converted water heater” designs.
SPECIAL -AN FITTINGS
• Helps prevent cavitation of external oil pump systems.
• For use with external wet sump pumps and pans with -10 AN or -12 AN fittings.
• One Per Package, includes O-ring.
scavenge sections. Also useful in applications where space limitations prevent the use of an in-line filter.
MOR22704
-12 AN to -16 AN Adapter
AN ALUMINUM PORT PLUGS
• Aluminum AN Port Plugs are used to seal threaded female ports in fluid systems.
MOR22748 MOR22749
-10 AN With O-Ring Seal, Anodized -12 AN With O-Ring Seal, Anodized
• 400 watts of power. 110-120 volt rating. • Aluminum, 1/2”-14 NPT weld-in bung
TRANSMISSION ACCESSORIES
and 3' cord included.
• Heating element is 4-3/4” from fitting to tip. • Heats 12 quarts of oil to 60oF in 25 minutes.
TRANSMISSION PANS
MOR23991 Oil Preheater, Self Contained
EXTERNAL HEATING PADS
and improve
• New and improved lamination process. • Excellent for pre-heating of oil pans,
magnetic drain plugs.
• Now includes serrated flange
tanks and automatic
hex bolts.
MOR42010
• Fully Fabricated, Aluminum Pans. • One-piece Billet Rail.
• Reduce temperature
oil control.
• Dual fittings with
transmission pans. • Available with self-
Filter
Part #
Trans Type
Depth
Included
Required
MOR42000*
Powerglide
3.080”
Filter Spacer
Fram
FT1017
adhesive or hook/ spring attachment methods.
• Etched foil design distributes heat evenly.
• Superior grade silicone outer shell resists oil and dirt.
Turbo 350
3.000”
Filter Spacer Fram FT1021
Fram FT1074
MOR42020
Turbo 400
3.000”
Filter Ext.
Fram
FT1020
MOR23995 MOR23996 MOR23997
6” x 12”, Hook and Spring. 360 Watts. 8” 110V Cord 5” x 7”, Self-adhesive. 400 Watts. 36” 110V Cord
2” x 15”, Self-adhesive. 150 Watts. 36” 110V Cord
GM 700R4
2.375”
MOR42025
*Recomended Option Trans Pan Gasket: MOR93100
MOR42080
Torqueflite 727
2.330”
Filter Spacer
Fram
FT1039
361