Page 426 - VSI Master Catalog

PrograMMaBle Digital-7 With traction control
• This ignition is for professional
PrograMMaBle turBo launch controller
• Extremely fast microcontroller to
racers and sanctioning bodies that asked for traction control detection capabilities.
control boost pressure via an electronically operated waste gate valve.
• The TDC circuitry monitors the magnetic pickup input, senses a traction control problem and automatically goes into a revlimiting mode.
• Used by NHRA Pro-Stock Racing.
MSD7530T MSD Programmable Digital-7 Ignition w/ TDC
• Control the amount of boost pressure used during
the burnout and map a boost curve based on time for the launch and entire run.
• Control over the boost pressure is achieved through a PWM output that controls a three-way electrically operated air valve that is installed between the turbo and the waste gate actuator.
• To help in setting up and tuning the Controller, there is also an acquisition file that records the engine RPM, manifold pressure and the pulse width modulator output.
MSD7562 Programmable Turbo Controller
Manual launch control/shiFt light
• Lets you change the launch RPM setting of MSD programmable controls for last second changes with the turn of a dial.
• Front of the housing features a cluster of LEDs that will illuminate when the engine RPM reaches the programmed level to remind you to shift.
MSD7551 Manual Launch Control
PrograMMer/Monitor, hanD helD
• All of the Programmable 7 Ignition Controls optional programs can be set with this hand held programmer/Monitor.
• LCD will display the programming options which you can select to adjust or view the program that is already in the ignition.
• 6 positive contact push buttons make it easy to adjust even in race gloves!
MSD7550 Programmer/Monitor, Hand Held
PrograMMaBle Digital-7 With Boost retarD
• Map a timing curve based on
boost pressure.
• Set RPM limits for the launch,
burnout, spool and top end.
• Three retard stages for multiple nitrous applications.
MSD7535 Programmable Digital-7 w/ Boost Retard *
* Not NHRA Legal
MsD 8
• Produces the same extreme output of the original 8-Series, yet is now in a smaller housing with improved efficiency and internal components.
• 2-Step Rev Control. Now you can switch between two rev limits without extra wiring or housings.
• For those that are looking for a dual fire MSD 8, the new 8-Plus is all you need.
• Our engineers were able to deliver an ignition that is capable of firing two coils at once for those extreme racers using dual plug race setups.
MSD7805 MSD 8-Plus Ignition Control
tWo Pin connector
• MSD’s Two Pin Connector Kit replaces damaged connectors or aids in custom wiring.
aDjustaBle intensitY leD shiFt light
• A simple and small shift light that
• This is the same connector used on MSD’s magnetic pickup harnesses. • Each kit comes with two connectors
of the LED.
• Plugs directly into Programmable 7-Series Ignitions.
and four pins.
MSD8824 MSD Two Pin Connector
MSD7542 Adjustable Intensity LED Shift Light
engine saVer
• Designed to be used only with the MSD 8 Ignition Controls.
• Provides two RPM limits so you can have an overrev limit and set
a low limit for consistent launches.
MSD8978 MSD Engine Saver
they could easily control the intensity
MsD ViBration Mounts
• Offered in three different types.
• One for the 5- and 6-Series ignitions,
one for the 7-, 8-, and 10-Series ignitions, and one for the Pro Power Coil.
MSD8800 7, 8 & 10 Series (4/pkg)
MSD8823 5 and 6, SCI, Digital 7-Series (4/pkg) MSD8825 Pro Power Coil (4/pkg)
424