Page 359 - VSI Master Catalog

POSITIVE SEAL VENTED FITTINGS
BILLET ALUMINUM VACUUM RELIEF VALVES
• Designed to greatly simplify the plumbing of a vacuum pump.
• Two styles allow fastening through valve covers (MOR22637) or threaded directly into lifter valley (MOR22636).
• Screws into side of valve cover.
• Provides leak free O-ring seal on any flat
• Vacuum relief point is adjustable by shimming an internal spring to get the precise amount of vacuum desired.
valve cover surface.
• No welding required.
• Anodized to prevent corrosion.
• Can be disassembled for easy cleaning and maintenance and works with any vacuum level.
MOR22635 -12 AN Fitting MOR22634 -16 AN Fitting
POSITIVE SEAL NPT FITTING
• Made of 6061 T6 Billet aluminum and have a clear finish.
• Designed to facilitate connection of vacuum gauge to the valve cover without welding.
MOR22636 3/8” NPT MOR22637 3/4”-16 Thread
VACUUM PUMP REGULATOR
• Use with Moroso Vacuum Gauge MOR89610. • Includes O-rings.
• Screws directly into vacuum pump’s -12 AN inlet.
MOR22632 Positive Seal 1/8” NPT Fitting
VACUUM RELIEF VALVES
• 360o directional adjustability. • Anodized - clear.
• Vacuum relief point is adjustable by turning the built-In adjustment knob to get the precise amount of vacuum desired.
MOR22633 Vacuum Pump Regulator
CLAMP ON BREATHER
• Integral locknut keeps the adjustment locked until the next adjustment is needed.
• Clamps onto a 1” outside diameter tube. • Fits Moroso Billet Aluminum Vacuum
• Can be disassembled for easy cleaning and maintenance
and MOR22637.
• Provides maximum protection against
• Made of 6061 aluminum and smooth finish.
dirt and airborne debris without
MOR22630 MOR22631
Gland Seal (-12 AN Female)
Face Seal (“Face to Face” thru Sheetmetal)
restricting air flow.
• Clamp included.
• Cleanable and re-usable: oil before use.
DRY SUMP TANKS
• Large diameter, billet aluminum, screw-on cap with O-ring.
MOR68791 Clamp On Breather, 1” I.D.
UNIVERSAL TANK MOUNTING BRACKET
Relief Valves MOR22633, MOR22636
• 15" Tall, 6 qt. capacity.
• Fits all 3” to 3.25” diameter tanks.
• Manufactured from a one-piece zinc
MOR22686 MOR22687
-16 AN Inlet w/o Breather -16 AN Inlet with Breather
plated steel bracket with 11/32” mounting holes and a sliding, stainless steel T-Bolt clamp.
BREATHER TANKS
• Locking nut to prevent loosening.
• Quick disconnect strap.
• Meets the requirements of all sanctioning bodies.
MOR63401
3-1/8" 3-1/8" 3-1/8" 3"
3” to 3.25” Dia.
Inlet
Capacity
Material
Dia.
Height
Mount Type
MOR85400
-12 AN Male
1 qt.
Black polyethylene
3-1/8"
10.5"
Bolt-In
MOR85402 MOR85406 MOR85473 MOR85466
-10 AN Male
-6 AN Male
(2) 3/8" NPT Female (2) -12 AN Male
1 qt.
1 qt. 28 oz. 2.5 qt.
Black polyethylene Black polyethylene Natural Aluminum Natural Aluminum
10.5" 10" 6.5" 17.5"
Bolt-In
Bolt-In Clamp Mount Clamp Mount
MOR85404
-8 AN Male
1 qt.
Black polyethylene
3-1/8"
10"
Bolt-In
MOR85470
3/8" NPT Male
1 qt.
Natural Aluminum
3-1/8"
11.5"
Bolt-In
MOR85465
-12 AN Male
1 qt.
Natural Aluminum
3-1/8"
11.5"
Bolt-In
MOR85500
-12 AN Male
1 qt.
Natural Aluminum
3-1/8"
11.5"
Clamp Mount
357