Page 358 - VSI Master Catalog

VACUUM PUMP BRACKETS
VACUUM PUMP PULLEYS
VACUUM PUMP V-BELT PULLEYS
ALTERNATOR AND VACUUM PUMP MOUNTING KITS FOR SBC AND BBC • Two mounts are incorporated
• These competition-style V-belt pulleys bolt directly onto OEM, Holley, and other smog pumps used as engine vacuum pumps to improve ring seal.
into one billet aluminum frame with belt adjustment for alternator and vacuum pump.
• Deep V-groove design ensures belt retention under all racing conditions.
• Designed to mount mini
ND-style 93mm alternators and
Moroso MOR22642, MOR22644, MOR22840 or MOR22842 Enhanced Design Vacuum Pumps to either side of the engine, while clearing the electric water pump.
• They’re machined with six holes to reduce weight, and they use the stock mounting pattern.
• Includes all spacers and hardware.
MOR64885 MOR64887
V-Belt Pulley, Stock Mount Pattern
V-Belt Pulley, 7/8" Offset, 5" Dia., Stock Mount
MOR63836 MOR63837 MOR63838
BBC, use with Moroso Pump MOR63547 and Moroso Enhanced Design Vacuum Pumps
BBC, Use with CSR Pump and Moroso Enhanced Design Vacuum Pumps
BBC, use with Meziere Pump and Moroso Enhanced Design Vacuum Pumps
GILMER TYPE
VACUUM PUMP PULLEY • Fits Moroso Racing Vacuum
VACUUM PUMP BRACKETS
• Anodized Billet Aluminum Vacuum Pump Mounting Brackets fit a variety of engine and vacuum pump combinations.
• Designed to work more efficiently and take less power to drive
your vacuum pump.
Pumps or similar “smog” pumps that use OE-style, 3-bolt mounting pattern.
MOR64886 Up to 3/4" Gilmer Belts, 28 Tooth MOR64888 Up to 1/2" Gilmer Belts, 36 Tooth
RADIUS TOOTH VACUUM PUMP PULLEYS
• Aircraft-quality aluminum with hard-coat anodized finish.
• Direct, bolt-on installation.
• Fit the engines directly or mount to a motor plate.
• Uses a 1/2" wide drive belt, and with a wide variety of drive pulley sizes, any drive ratio is achievable.
MOR63910
MOR63911 MOR63921 MOR63917
Moroso “Original” Style Vacuum Pumps. Use this Bracket to Mount Pump to Motor Plates on ALL Engines. Also Mounts to Big and Small Block Chevy Cylinder Heads
Moroso “Original” Style Vacuum Pump. Mounts to SB Ford, Driver or Passenger Side Cylinder Heads Mounting Bracket, Vacuum Pump 4.6/5.4L Ford, Comes Complete with Hardware
Bracket for Moroso “Enhanced Design” Vacuum Pump MOR22642 and MOR22842
• Fits any 1" mandrel with a 1/8" keyway slot.
gauge to be connected.
• Can also be used as a drain back location. • Black Anodized.
VACUUM LINE CAP KIT
MOR65397 MOR65398
SBC
BBC, 273-440 Chrysler, and all Fords Except 351C,
351M and 400
• Convenient kit provides a quick, sure way to seal vacuum line connections at carburetors, manifolds, etc. when vacuum lines have been removed.
Note: Installation of this product requires pulling vacuum from a valve cover as well
• Kit consists of color-coded soft
plastic caps in quantities and inside dimensions as follows: two 1/8”, six 3/16”, six 1/4”, two 5/16”, four 3/8”.
356
• Manufactured from aluminum and black anodized for corrosion protection.
MOR23533 MOR23537
Radius Tooth Vacuum Pump Pully, 20 Tooth Radius Tooth Vacuum Pump Pully, 28 Tooth
BILLET ALUMINUM EQUALIZING PLATES WITH FITTINGS
• Includes 1/8” NPT Fitting and -12 AN Fitting.
• Allows the vacuum pump and vacuum
VACUUM PUMP LINE KIT
• Includes 6 feet of steel reinforced hose, two 90° hose fittings
and two -12 AN straight hose fittings.
MOR22649
Vacuum Pump Line Kit
MOR41090 Vacuum Line Cap Kit