Page 181 - VSI Master Catalog

PErformEr-Plus Camshaft kIts (CoNtINuED)
Duration
@ .050 Part # Int/Exh
lift
@ Valve Int/Exh
Intake Idle Vac lobe Center @ 1000
seps. line rPm
optional
Valve
springs Cam features
396-427-454 V8
EDL2162 218°/228° .500/.500 114° 109° 15” 5862 Produces 470 ft.-lbs. When Matched with #2161 Intake and Stock Heads.
Not for 1965-66 Big Block Chevrolets Requiring a Grooved Rear Cam Journal.
Chrysler 318-340-360 V8
EDL2177 204°/204°
ford 289-302 V8
EDL2122 204°/214°
351m-400 V8
EDL2172* 204°/214°
429-460 V8
EDL2167* 194°/204°
PoNtIaC 350-455 V8
EDL2157* 204°/214°
.420/.420
.448/.472
.484/.510
.460/.480
.420/.442
110° 106° 16”
112° 107° 16”
112° 107° 14”
105° 110° 15”
110° 105° 15”
5877/5977
5822/5922
5872/5972
5867
5857
Produces 305 ft.-lbs. When Matched with #2176 Intake and Stock Heads. Not for 1985 and Later Engines with Roller Lifters.
Produces 310 HP & 260 ft.-lbs. when Matched with #2121 Intake and #60329 Heads. Not for 1985 and Later Engines with Roller Lifters.
Produces 390 ft.-lbs. When Matched with #2171 Intake and Stock Heads.
Produces 455 ft.-lbs. When Matched with #2166 Intake and Stock Heads.
Produces 387 HP & 439 ft.-lbs. When Matched with #2156 Intake & #60599 Heads.
383-400-440 V8
EDL2192 204°/214° .420/.442 112° 107° 14” 5892/5992 Produces 427 ft.-lbs. When Matched with #2191 Intake and Stock Heads.
For 1968 and Later.
351W V8
EDL2182* 204°/214° .448/.472 112° 107° 15” 5822/5922 Produces 325 ft.-lbs. When Matched with #2181 Intake and Stock Heads.
352-428 V8
EDL2106*
194°/204°
.460/.480
110° 105° 16”
5806/5906
Produces 410 ft.-lbs. When Matched with #2105 Intake and Stock Heads. Will Not Work in 427 Side-Oilers. Isky Spacer #350AW Required for All FE Fords 1962 and Earlier.
olDsmoBIlE 350-403 V8
EDL3712* EDL2152*
204°/214° 214°/224°
.449/.473 .472/.496
114° 106° 16” 5812 112° 107° 15” –
Produces 330 ft.-lbs. When Matched with #3711 Intake and Stock Heads. May Require Longer than Stock Push rods. Will Not Fit 1966 & Earlier. Produces 445 ft.-lbs. When Matched with #2151 Intake and Stock Heads. Will Not Fit Toronados or 1966 and Earlier. Fits 1967-84 400-425-455, 39° Bank Angle Engine.
torkEr-Plus Camshafts
• Designed to work with Torker II manifolds for performance from 2,500 to 6,500 RPM,
these camshafts are ideal for high-performance street, drag or marine applications.
Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications.
• Hydraulic flat tappet lifters are included with each camshaft.
Duration
@ .050 Part # Int/Exh
lift
@ Valve Int/Exh
Intake optional lobe Center Valve
seps. line springs Cam features
ChEVrolEt
396-427-454 V8
EDL5062* 224°/232° .527/.553 114° 109° 5762 Not for 1965-66 Big Block Chevys
Requiring a Grooved Rear Cam Journal.
179