Page 183 - VSI Master Catalog

timiNG CovErs (CoNtiNUED)
NitroUs Blow-DowN tUBE, raCEr safEtY Blow-off aDaPtEr aND safEtY valvE
• Replaces the standard safety valve to allow
alUmiNUm timiNG CovErs for small-BloCk forD
• Stock replacement for late model EFI 5.0L
for the use of a hard line blow-down tube. • A blow-down tube safely vents nitrous
and 351W engines. Includes gaskets and
crankshaft seal. Both are compatible with
stock or Edelbrock Victor Series aluminum water pumps.
outside the car should the safety blow.
EDL4250 1965-78 289 (Non K-code) & 302 EDL4250 1969-87 351W
EDL72960 EDL72961
Nitrous Blow-Down Tube (22” Long) Racer Safety Blow-Off Adapter
NitroUs PlatE aND Efi sYstEms
NitroUs BottlE HEatEr
rPm NitroUs PlatE sYstEms
• Thermostatically raises the pressure when necessary by applying heat to the bottle.
• Comes with all necessary hardware and includes velcro straps for quick and easy
• The solenoids are larger than the Performer systems and power increases can be adjusted from 100-250 horsepower. 1/2” thick aluminum plate that fits between the carburetor and the manifold.
silver Bottle
EDL70050 EDL70053
bottle removal.
EDL72700 Bottle Heater - 12 Volt (For 10-lb. and 15-lb. Bottles)
Square-Bore Carbs (100-150-175-200-250 HP) 4500 Series Carbs (100-150-200-250 HP)
NitroUs BottlE BlaNkEt
• Helps to maintain consistent bottle pressure by keeping heat in the bottle when it’s cold, and by protecting the bottle from direct sunlight and the possibility of over-pressurization.
EDL72705 Nitrous Bottle Blanket (For 10-lb. Bottles)
PUrGE valvE kits
• Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection.
• Bleeds accumulated nitrous vapor from the supply lines.
• Includes solenoid, activation switch, filter, aircraftquality fittings and wiring.
NitroUs CUstom PlUmB kit v8 (sUPEr viCtor witH viCtor Pro solENoiD)
• Basic kit for a direct port nitrous system
installation on an existing manifold. Supplied with 300 HP jetting. Victor Pro bottom exit nitrous solenoids. 1/16” NPT. Choice of E2 stainless steel or unique E3 titanium “Straight-Shot” nozzles for better nitrous and fuel delivery.
16 stainless steel jets (8 each of 2 sizes).
E2 Nozzle
EDL71851
E3 Nozzle
EDL71853
Custom Manifold V8 Plumb Kit (300 HP)
viCtor Jr. NitroUs PlatE sYstEms siNGlE-staGE: 200-400 HorsEPowEr • Features four nitrous and four fuel jets.
EDL72176 EDL72178
-4 AN Purge Valve Kit -6 AN Purge Valve Kit
11/16” thick billet aluminum plate with shorter spray bars
silver Bottle
EDL70056 EDL70055
alUmiNUm NitroUs BottlEs
• Made of aluminum alloy, are D.O.T. approved and include an Edelbrock high-flow CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance.
• They include a pressure venting system to prevent pressure increases beyond safety level.
EDL72300 10 lb Bottle, 20” X 6-7/8”, Silver
1/4-tUrN Ball valvE kit
• Designed as an emergency shut off to isolate the nitrous in the bottle.
• If an accident or fire occurs, 1/4
of a turn shuts off nitrous flow to the solenoids.
EDL72952 .375" Orifice, Rated to 2,000 PSI
iNDiviDUal taPEr faCE JEts
EDL73014 thru EDL73120 (Last 3 Digits Indicate Size, .014” thru .120”)
Square-Bore Carbs (200-300-400+ HP) 4500 Series Carbs (200-300-400+ HP)
NitroUs aCCEssoriEs
ProGrEssivE NitroUs CoNtrollEr
• Pulse width modulation regulates the amount of nitrous being delivered over a specified period of time by the nitrous and
fuel solenoids.
• Select and individually program nitrous
parameters to optimize traction and chassis
control. Integrated battery voltage monitor.
Non-volatile data memory retains your
settings. +12-volt timer output for auxiliary output. Complete with wiring harness and manual. Single or dual ramp adjustable from 0 to 9.999 seconds.
EDL71900 Progressive Nitrous Controller
181