Page 179 - VSI Master Catalog

HEAD BOLT KITS
• Manufactured by ARP, Edelbrock Head Bolt Kits contain a complete set of the highest quality head bolts and hardened washers available.
• Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. • Reduced diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head
re-torquing.
• Hardened and parallel-ground washers are included. • Rated at 170,000 PSI.
EDL8550 S/B Chevrolet Head Bolt Kit for #5073, #5089, #5087, #60719, #60739,
#60759, #60859, 60879, #60899, #60909, #60979, #60989, #77569 and #77639
EDL8551 B/B Chevrolet Head Bolt Kit for #50459, #60459, #60479, #60499 and #60559 (Not for Stock Heads, Mark IV Only) EDL8555 S/B Chrysler Head Bolt Kit for #60779 and #60179 (Not for Stock Heads)
EDL8552 Ford 289-302 Head Bolt Kit (7/16” Bolt Diameter, use Bushings #9680) for #5023, #5025, #5027, #60229,
#60259, #60329, #60359, #60379, #60399, #77169, #77219, #77289 & #77299
EDL8553 Ford 351-Windsor Head Bolt Kit (1/2” Bolt Dia., used on 351W w/1/2” Threads) for #5023, #5025, #5027,
ROCKER STUDS
• These high-quality rocker studs
are used in all Edelbrock cylinder heads requiring 3/8” screw-in studs.
• Sold in packaged quantites of two. EDL8598 Rocker Stud (qty. 2)
1986-95 5.0L MUSTANGS
#60229, #60259, #60329, #60359, #60379, #60399, #77169, #77219 and #77299
EDL8557 Ford FE 390-428 Head Bolt Kit for #60057, #60058, #60069, #60079 and #60087
EDL8558 Oldsmobile Head Bolt Kit for #60519, #60517
EDL8556 Pontiac Head Bolt Kit for #60509, #60579 and #60599 Made Before 3/15/02 (Not for Stock Heads) EDL8549 Pontiac Head Bolt Kit for #60509, #60579, #60587 and #60599 Made After 3/15/02 (Not for Stock Heads)
HEAD BOLT BUSHINGS WITH INTEGRAL WASHERS • Allows the use of stock or Edelbrock
7/16” head bolts on Edelbrock heads
with 1/2” head bolt bosses.
• Required for 289-302 V8s & 1967-69 AMC.
EDL9680 For Ford 5.0L (20 per Package)
THROTTLE BODIES
PRO-FLO XT THROTTLE BODIES
• These 90mm single bore throttle body is intended for Pro-Flow XT and EFI Victor elbow applications.
• It has provisions for either LS1 or LS2 mounting bolt patterns.
• The throttle body uses LS1 style TPS,
IAC and PCV port. It offers better idle
control than other 90mm throttle bodies, because of the addition of an idle bleed screw.
EDL3869 Universal 90mm (1100 cfm)
EDL2737 Adaptor Plate; LS1 TB to 90mm Opening
• 65mm size is ideal for stock manifolds. • 70mm is the optimum choice for the
ROLLIN’ THUNDER HYDRAULIC ROLLER CAMSHAFTS
• Rollin’ Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability; reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible. Performance – Roller camshafts produce higher lift velocity and faster valve action produces increased horsepower and torque gains. Drivability – Produces great sounding idle while providing excellent vacuum at idle to support power accessories. Durability - The smaller surface contact area of a roller tappet and reduced friction combined with stronger camshaft material (hardened steel or iron) ensures longer camshaft life. Environmental - Can use ILSAC GF-4 oil, which lowers your engines emissions and does not require zinc or phosphate oil additives. Economy - Reduced contact friction between the lifter and
Performer 5.0/Performer RPM 5.0 EFI
intake.
• 75mm is intended for more radical
engine combinations and requires port
matching to fit most manifolds.
• 1986-93 Throttle Bodies must be
used with matching EGR Plates.
• Gaskets are included. 50-state street legal.
65mm 70mm
86-93 5.0L Mustang N/A EDL3825/3828 Replacement Gaskets EDL3830 EDL3830
75mm
EDL3826/3829 EDL3831
camshaft increases an engines fuel economy for better mileage potential.
Duration
@ .050 Part # Int/Exh
Lift
@ Valve Int/Exh
Intake Lobe Center
Seps. Line Vacuum Cam Features
FORD 5.0L V8
EDL3722 220°/220° .498/.498 110° 110° 13” This Camshaft Works Great When Matched with Performer Intake Manifold #3821 and Performer Cylinder Heads #60379;
This Combo Produces 300 HP / 325 ft.-lbs. of Torque.
177