Page 180 - VSI Master Catalog

CAMSHAFTS
PERFORMER RPM CAMSHAFTS
• Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm.
• Dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque.
@ .050 @ Valve Lobe Center @ 1000 Valve
Part # Int/Exh Int/Exh Seps. Line RPM Springs Cam Features
CHEVROLET
283-400 V8 (1957-1986)
EDL7102 234°/244° .488/.510 112° 107° 11” 5703 410 HP & 408 ft.-lbs. with #7501 Intake
& #60899 Heads. Use Only Stock Ratio Rocker Arms.
396-427-454 V8
EDL7162 240°/246°
390-428 V8
EDL7106 236°/236°
PONTIAC
350-455 V8
EDL7157 231°/240°
.560/.573 112° 110°
.572/.572 108° 103°
.470/.470 113.5°
112°
10” 5762
11” 5767
10” 5757
540 HP & 530 ft.-lbs. with #7163 Intake & #60559 heads. Not for 1965-66 Big-Block Chevys Requiring a Grooved Rear Cam Journal.
418 HP & 434 ft.-lbs. with #7105 Intake & #60069 Heads. Will not work in 427 Side- Oilers. Isky Spacer #350AW Required for All FE Fords 1962 & Earlier Required.
422 HP & 441 ft.-lbs. with #7156 Intake & #60599 Heads. Adjustable Pushrods or Rocker Arms Required.
FORD
289-302 V8
EDL7122 224°/234°
.496/.520
112° 107°
11” 5722
367 HP & 340 ft.-lbs. with #7121 Intake & #60259 Heads. Not for 1985-Later Engines with Roller Lifters. Screw-In Studs, Guideplates and Adjustable Rocker Arms Required.
OLDSMOBILE
350-403 V8
EDL7112 224°/234° .496/.520 112° 107° 12” 5712 397 HP & 400 ft.-lbs. with #7111 Intake &
Stock Iron Heads. Adjustable Pushrods or Rocker Arms Required.
PERFORMER-PLUS CAMSHAFT KITS
• Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque.
• All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. Many of our most popular Performer-Plus camshafts for small-block Chevys and Fords are 50-state street legal.
Duration
@ .050 Part # Int/Exh
Lift
@ Valve Int/Exh
Intake Idle Vac Optional Lobe Center @ 1000 Valve
Seps. Line RPM Springs Cam Features
AMC 290-401 V8
EDL2132 204°/214° .448/.472 110° 105° 15” 5832/5932 Produces 275 ft.-lbs. When Matched with #2131 Intake and Stock Heads.
Chevrolet 265-400 V8 (1957-86)
EDL2102 204°/214°
400 V8
EDL2103 214°/214°
.420/.442
.442/.442
112° 107° 14”
112° 107° 15”
5802/5902
5802/5902
50-State Legal for 1957-86 SB Chevrolet. Produces 320 HP &
382 ft.-lbs. When Matched with #2701 Intake and #60909 Heads.
50-state legal for 1957-86 Small Block Chevrolet. Produces 395 ft.- lbs. When Matched with #2101 Intake and Stock Heads.
305-350 V8 T.B.I. & LG-4
EDL3702 194°/214° .398/.442 112° 107° 16” 5802/5902 50-State Legal for 1976-95 SB Chevrolet. Produces 245 ft.-lbs. When Matched with #3701 Intake and Stock
heads. Non-Roller Applications.
178