Page 235 - VSI Master Catalog

T-5 BEARING RETAINER
• Smoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent engagement.
FRPM-7050-A Steel/Aluminum Retainer
8.8" RING AND PINION GEAR SET
• Ford factory ring and pinion sets for Mustangs, Rangers, and F150 Pickups. Ford uses a one-pass CNC machining process that cuts and laps the teeth for higher strength and better quality produced.
Ratio
3.27:1 3.73:1 4.10:1
8.8" TRACTION-LOC REBUILD KIT
• When replacing the ring & pinion upgrade your 8.8” Traction-Lok differential to a new one at a minimal cost. Fits all 8.8” Traction-Lok differentials. Kit includes clutch pack, shims, friction modifier
and instruction sheet.
FRPM-4700-B 8.8 Traction-Loc Rebuild Kit
FRPM-4209-F327 FRPM-4209-F373N FRPM-4209-G410
ENGINE GASKET KIT
• Manufactured to Ford specs by Fel Pro. The kits include race-quality head gaskets and Print- O-Seal intakes, oil pan and valve cover gaskets.
• Includes front and rear oil seals plus all gaskets for a complete rebuild. These high performance gasket sets are a must when rebuilding.
FORD RACING CROSSMEMBER AND SPRINGS FRPM-6003-A50 (‘63-’01) 289/302/351W
MUSTANG TRANSMISSION CROSSMEMBER
• Double hump design for dual exhaust Mustangs. Fits most engine/transmission combinations. 4.5” mounting dimension. Bushings included.
FRPM-5059-A Mustang “Double Hump” Transmission Crossmember
Amount Lowered
460 FOX ENGINE SWAP MOUNTS
• Use in 79-95 Mustang and other Fox-chassis cars to mount 429/460 engines.
• Rubber insulated, designed to work with M-6675-A460 rear sump oil pan kit and custom headers.
• Does not fit I-6 cylinder front crossmember. FRPM-6038-A460 Engine Swap Mounts
SUPER SPORT SPRING KITS
• Ford Super Sport spring kits are a variable rate springs that improve appearance, handling, with minimal ride loss.
10.5” PRESSURE PLATE BOLT AND DOWEL KIT
• Use with Ford Racing flywheels to align and
• Choice of two spring rates for
stiffness of ride quality. Set of four springs
pressure plate to the flywheel. • Includes three dowel pins that
1979-04 MUSTANG
FRPM-5300-B
FRPM-5300-C
Spring Rate Front
425/530 650
Rear
200/300 200/300
Front
.875” (1) .875” (1)
Rear
.500” (2) .500” (2)
Notes
5,6 5,6
are necessary to align and stiffen the pressure plate shell. NOTE: If these dowels are not used the clutch
Notes:
5 Will Not Fit 1999-04 Cobra
6 Due to Vehicle Assembly Tolerances These Specifications May Vary.
HEAD GASKET
• Ford Racing performance cylinder head gaskets minimize blowout and have a wire-ring combustion seat for extra sealing around combustion chambers.
integral lock washers. NOTE: Ford Racing and production flywheels have metric bolt holes for diaphragm style clutches. Ford Racing billet steel flywheels also have 5/16”- 18 SAE bolt holes for long style clutches.
attach the 10.5” diaphragm-style clutch
may chatter.
• Includes six 8mm bolts with
• Available with either steel-core
laminate construction for cast iron
heads, or graphite cores with a pre-flattened steel-wire ring, so they won’t brinell aluminum heads.
FRPM-6397-A302 10.5” Pressure Plate Bolt and Dowel Kit
RADIATOR HOSE KIT
• Thermostat bypass, three heater core hoses for A/C equipped Mustangs.
• Fits better than the other kits with unmolded hoses. Includes 12 special hose clamps with inner band for silicone hoses.
FRPM-6052-B 86-93 5.0L, Radiator Hose Kit
FRPM-6051-A302 289/302/351W
Cylinder Bore Application
Bore Gasket Comp. Comp Diam. Diam. Thick Volume
4.00” 4.100” .042” 9.1cc
233