Page 236 - VSI Master Catalog

OIL PAN GASKET
10.5” PRESSURE PLATE BOLT AND DOWEL KIT
• One-piece design that features rubber sealing material bonded to a
solid steel core, for a strong, reliable seal.
• Includes three dowel pins that are necessary to align and stiffen the pressure plate shell. NOTE: If these dowels are not used the clutch
FRPM-6710-A50
One-Piece Rubber Oil Pan Gasket
may chatter.
• Includes six 8mm bolts with
VALVE COVER GASKET
• Ford Racing has tough,
metal-core valve cover
gaskets available for both
types of engines, of course,
in your choice of flavors—either original equipment replacement or high performance.
integral lock washers. NOTE: Ford Racing and production flywheels have metric bolt holes for diaphragm style clutches. Ford Racing billet steel flywheels also have 5/16”- 18 SAE bolt holes for long style clutches.
FRPM-6584-A460 5.0L, 429/460 Wedge FRPM-6584-A50 5.0L, 302/351W
HYDRAULIC ROLLER LIFTERS
• Features the same high quality as the pieces that Ford uses as original equipment in the 5.0L HO EFI engine. Some are direct replacements for the OE lifters and are 50-state legal. Others are designed to be used when converting a “non-roller” block to a
OFF-ROAD IDLER BRACKET (1979-93 MUSTANG)
FRPM-8604-A50 Idler Bracket
IGNITION COIL COVERS
FRPM-6397-A302
10.5” Pressure Plate Bolt and Dowel Kit
• Competition air pump idler bracket for off-road use only, where air pump is not necessary.
• Direct bolt-on replacement for
stock air pumps and uses a
standard serpentine belt.
Fits 302/351 Mustang applications when catalytic converters are not used.
roller cam. Note that custom pushrods and minor clearancing work to the block may be necessary with these lifters.
FRPM-6500-r302
302 (5.0L) EFI Hydraulic Roller Tappet OEM Replacement. Small Block.
• Fits most 4.6L/5.4L DOHC with coil on plug ignition.
ROCKER ARM PEDESTAL SHIM KITS
• Micro polished billet aluminum.
• Used with all bolt- down style roller rocker arms to obtain correct lifter preload.
FRPM-6529-A302 Rocker Arm Shim Kit
HIGH VOLUME OIL PUMPS
FRPM-6067-A
4.6L/5.4L
DOHC Wire Cover Set
CAMSHAFT ROLLER BEARINGS
• These kits include
16 thin and 16 thick
shims, which can be
used to reduce lifter preload by .030” (thin shim), .060” (thick shim), or .090” (thin plus thick shim).
• Only require oil splash lubrication. • Oil feed holes can be totally
Application
FRPM-6261-A460 429/460 Wedge
blocked off, to reduce oil aeration and windage losses.
ROLLER CAM CONVERSION KIT
• These high-quality oil pumps are pressure-tested and hand-turned to deliver more oil than stock pumps.
• Designed to help engine builders assemble our short blocks to complete engines.
O.D.
2.5”
I.D.
2.125”
Length
.625”
• Kit includes (8) hydraulic roller
lifter powdered metal tie bars,
(1) retainer plate and (2) bolts.
Fits 85-2001 302, 94-97
351W, 96-04 M-6010-A4/ A58/R302/A351/B351/C351/R351/ R352/S351/V351/W351 race blocks.
FRPM-6253-A50 Roller Cam Conversion Kit
FRPM-6600-A460 FRPM-6600-B3 FRPM-6600-D2 FRPM-6600-D46 FRPM-6600-M50
68-97 429/460 Wedge 69-97 351W
62-01 221/255/260/289/302 92-06 4.6L/281
62-01 221/255/260/289/302, Std. Volume
234