Page 562 - VSI Master Catalog

CHEVROLET FLEXPLATE SHIMS
• Achieve optimum spacing when installing a new flexplate on Chevrolet crankshafts.
• High-quality 0.030” thick steel. Also fit manual transmissions using a flywheel.
TCI399100 0.030”, 6-Bolt Crank Flange
LIGHTNING STICK SHIFTERS
• Available in forward and reverse shift patterns. An adjustable positive stop prevents overshifting, and one-hand re- verse lockout makes operation simple. Includes a mounting bracket and shift lever. Cable not included.
TCI418200 Competition Floor Shifter, Ford, Lincoln, Mercury, C-4/C-6
C-4 PAN FILL CONVERSION KITS
• Allows Ford C-4 transmissions with screw- in dipsticks to use an aftermarket aluminum transmission pan. Drill and tap the pan to accept the fitting, then screw in the dipstick like you would with the factory pan.
TCI518050 C-4 Pan Fill Conversion Kits
SHIFT LEVER
• Works with most aftermarket shift- ers; no modifications; fits directly over the kickdown switch opening.
TCI748400 PG Shift Lever
RACING FILTER AND PAN GASKET KIT
• Larger filter surface for more flow and superior filtering. Thicker pan gasket for a leak-free seal.
uNIVERSAL DRAIN PLuG KITS
• Easily convert your factory pan to a drain plug equipped unit for easier transmission servicing.
TCI805800 Universal Drain Plug
uNIVERSAL TRANSMISSION COOLERS
• Compact, lightweight, all-aluminum construction keeps the transmission well within safe operating temperatures. Includes complete installation kit with hose, clamps, fittings
and mounting hardware.
TCI820500 Natural, 7-1/2” x 12-3/4” x 3/4”
RATTLER TORSIONAL VIBRATION ABSORBERS
• These mid-mount plates support the back of the engine so the transmission can be easily removed. Available in 1/4”-thick aluminum or 1/8” thick carbon steel with
an integral flexplate shield for increased safety
and transmission tunnel clearance. TC932500 SB Chevy, Mid-Mount Engine Plates
PERFORMANCE TRANSMISSION COOLERS
• Feature a durable black powdercoated finish plus AN fittings to connect to either stainless steel braided or high-pressure hose. Pressure-checked to 300 PSI. Mounting kit included.
TCI823200 TCI823500 TCI823800
Aluminum, Black, 7-1/2” x 12-3/4” x 3/4”, 18000 GVW Aluminum, Black, 7-1/2” x 15-1/2” x 3/4”, 22000 GVW Aluminum, Black, 10” x 15-1/2” x 3/4”, 26000 GVW
TCI228500 TCI328500 TCI377400
TCI628500
66-Up TH400
69-Up TH350
Buick, Chevy, GMC, Oldsmobile, Pontiac, 700R4, 4L60, Kit
Buick, Chevy, Oldsmobile, Pontiac, Powerglide, Kit
ROLLSTOP KITS
• Keep your vehicle solidly planted until you’re ready to go. The waterproof, 6061 T-6 aluminum solenoid valve can withstand 3,000 PSI, yet draws only one amp of cur- rent. Includes switch, mounting bracket, in-line fuse connector, mounting hardware.
TCI861700 Line Lock, 1/8" NPT Inlet/Outlet, Natural Aluminum TCI861735 10-11 Camaro SS and V6, Rollstop Kit
MID-MOuNT ENGINE PLATES
QuICK MOuNT KITS
• Four high-tensile nylon mounting rods, locking nuts and rubber shock pads. For mounting coolers or electric fans.
TCI821500 Mounting Kit, Nylon, Black, Set of 4
• Add crankshaft and bearing life. Does not use viscous fluids. Virtually no maintenance. Rattlers’ timing marks etched on body and cannot move relative to the crankshaft cen- terline. SFI 18.1 certified.
CIRCLE TRACK AuTOMATIC TRANSMISSION FRONT PuMP DRIVES
• Run without using a torque converter. In-
cludes crankshaft hub adapter, input spline adapter, front pump seal and mounting hardware. The front pump drives are avail-
able in a 1-, 2- or 3-piece configuration, based on your vehicle’s transmission.
TCI870001 TCI870002 TCI870003 TCI870005
TCI870006
55-95 SB Chevy, GM, Internal Balance, 6.29” Diam. 55-95 SB Chevy, GM, Internal Balance, 7.17” Diam. 70-80 SB Chevy 400, External Balance, 7.92” Diam. 66-72 BB Chevy, 396/402/427, Internal Balance, 7.17” Diam.
TCI745000 Front Pump Drive, 2-Piece, Chevy Powerglide
560
70-00 BB Chevy 454, External Balance, 7.92” Diam.