Page 435 - VSI Master Catalog

VacuuM aDVance locKout
• This bracket allows you to remove
the vacuum advance from MSD distributors; 8360, 8361, 8363, 8519, 8543, 8544, 8572, 8573, 8516, and 8515.
MSD8468 Vacuum Advance Lockout
Magnetic PicKuP
• MSD replacement magnetic pickup currently found in all Billet and Pro-Billet Distributors.
aPs high torQue starter
• The “Advance Power System Starter” cranks the highest compression engine on a hot day. 4.4:1 gear reduction.
• Smooth engagement and thousands of starts.
• Four-clocking positions.
• Billet aluminum mounting block.
• Clears most headers and kicked out oil pans.
MSD5095 SB & BB Chevy 158/168-Tooth Flywheel MSD5090 Ford 289, 302, 351W V8 A/T
MSD5096 LS-1, LS-7, Gen III
MSD5098 Mopar V8
rePlaceMent Parts solenoid
MSD5086 GM LS, for PN 5096
MSD5087 Chevy, PN 5095 and Ford, for PN 5090
gear clutch assembly
MSD5089 For PN 5090, PN 5095 and PN 5096
MSD84661
Magnetic Pickup for all
MSD Billet & Pro-Billet Distributors
aDVance Kits
• For all MSD Distributors.
• This kit contains an assortment of
PrograMMaBle Fuel PuMP Voltage Booster • The updated Fuel Pump Booster is
springs, advance limit bushings, and a mechanical advance lockout screw.
MSD8464 Advance Kit, All MSD Distributors MSD8628 Advance Kit, MSD Pro-Billet Distributors
tach DriVe aDaPter
• The standard tach drive for MSD distributors is a 3/16” tang cable.
• This drive adapter works on a .0104” square drive (Corvette style) cables.
MSD8491 Tach Drive Adapter, Tang to Square Drive
cheVrolet DistriButor o-ring Kits
• These Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear.
• They are made of high-grade rubber
and will keep the distributor shaft securely in place at operating RPM.
MSD8494 O-Ring Kit, Billet Chevy Distributors
DYnaForce
high torQue starters • 4.4:1 gear reduction. 3 HP motor. • Four-clocking positions.
MSD5090 Ford 289, 302, 351W V8 A/T MSD50901 SB Ford, 3/8" Depth
MSD5092 BB Ford 351M, 400M, 429, 460
MSD5093 Ford FE 390, 427, 428
MSD5095 SB & BB Chevy 158/168 Tooth Flywheel
MSD50951 Chevy 168 Tooth, Staggered Bolt Pattern
MSD50952 Chevy 158/168 High Speed Magnetos/Alcohol
MSD5096 LS-1, LS-7, Gen III
MSD5097 Pontiac/Oldsmobile 326,455
MSD5098 Mopar V8
MSD5099 AMC, (All except 4.0L)
an easy way to maintain the proper
fuel pressure on your car after adding a power adder such as a turbo or supercharger.
• The Booster allows you to make your boost adjustments through a PC for improved control and accuracy.
MSD2351 Programmable Fuel Pump Voltage Booster
high Pressure electric Fuel PuMP
• High flow, high pressure pump maintains a stable fuel supply to the fuel injectors throughout the entire engine’s RPM range.
• Supports up to 500 HP.
• Ideal for use with nitrous oxide apps.
• 40 GPH @ 40 PSI.
• Mounts in-line (out of tank) with 2-rubber mounting clamps. • Nipple 3/8” inlet, 5/16” outlets
MSD2225 High Pressure Electric Fuel Pump
ManFolD aBsolute Pressure sensors
• This sensor will respond to changes on manifold pressures and relay the
information to the ECU in the form of a voltage signal ranging from about 1 to 5 volts.
• Several different versions available for normally- aspirated and engines with blowers.
Description
MAP Sensor, 2-Bar for Blown/ Turbo Applications up to 20lbs of Boost
MAP Sensor, 3-Bar for Blown/ Turbo Applications up to 30lbs of Boost
stock style
N/A MSD2313
For MsD controls
MSD23121
MSD23131
433