Page 400 - VSI Master Catalog

ELECTRIC WATER PUMP DRIVE KIT
• Lessen the power drag from
ALUMINUM CARB SPACER KITS
• Increase power and performance with a carb spacer. Fits Holley and Carter standard bolt patterns. Precision die cast aluminum spacers with all hardware needed.
MRG6005 1" Open Center
MRG4945 1" Open Center With 3/8" PCV Tube
MRG6006 1" Ported
MRG6007 2" Open Center
MRG6008 2" Ported
conventional pulley drives. An HD electric motor with about 1500 RPM is enough for cooling without draining hp from the engine.
MRG4333 GM, V6 231; Chevy, all V8 and V6 200/229; Ford SB/BB; Mopar SB/BB/Hemi; Buick 350;
Olds 350-455
MRG4433 Same as 4333 w/Larger Motor Pulley,
PHENOLIC THERMAL INSULATING CARB SPACERS • An advanced phenolic thermoset
GM/FORD/AMC
MRG4363 160°
MRG4364 180°
MRG4365 195°
Bolt Pattern
MRG944 Replacement Carburetor Adapter Hardware Kit
14 Spline and Longer Water Pump Drive Belt (about 40% Faster)
WATER OUTLET RESTRICTOR PLATE KIT
• Adjust the flow of water to radiator. Three restrictor plates with 5/8”, 3/4”, 1” ID holes.
MRG6126 Water Outlet Restrictor 90° Plates
WATER PUMP PULLEY SHIM KITS
• Installs between water pump flange and pulley. Includes two 1/16’’ and one 1/8’’ shim.
MRG6129 Water Pump Shims
CHROME UNIVERSAL FAN SHROUD
• Thick chrome plated steel. Universal design. Trimming and drilling required for install.
MRG9864 3”W Chrome Fan Shroud
MRG9865 5-1/2”W Chrome Fan Shroud
HIGH PERFORMANCE THERMOSTATS
• Resists large variations in coolant pressure at higher RPMs. Opens at the correct temp every time. Perfect for street or strip.
plastic withstands high manifold temps. Insulates and reduces the heat flow to carburetors. Fits Holley, Carter and Quadrajets.
CHRYSLER/DODGE/PLYMOUTH
MRG4366 160° MRG4367 180°
Includes Four 5/16"-18 x 3/4" Socket Head Bolts, Four 5/16"-24 x 1-1/4" Hex Head Cap Screws, Four 5/16"-24 Hex Nuts and Four 5/16" Flat Washers
MR. GASKET THERMOSTATS FOR LS1
• For all new style Chevy LS series cars with a separate thermostat and water neck. Our 2005 Pontiac GTO gained 5 hp with the 180o unit.
MRG6367 LS1 Late Thermostat 160o
MRG6368 LS1 Late Thermostat 180o
MRG6369 LS1 Late Thermostat 195o
CARB SPACERS
ALUMINUM 2-IN-1 SPACER WITH TWO PHENOLIC INSERTS
• Outside aluminum spacer takes a
CARBURETOR COMPONENTS
MRG3404 Four-Hole Bore Manifold Design 1.00"H MRG3405 Open Center Manifold Design 1.00"H MRG3406 Quadrajet Four-Hole Design 1.00"H
CARBURETOR ADAPTER KITS
• Update carburetion and manifolds to bigger and better carbs. Die cast aluminum. Installs quickly. Includes all hardware.
MRG1930 Adapts Holley 4500 4-BBL Carb to Large Base Holley and AFB 4-BBL Manifolds
MRG1932 Adapts Square Flange Carb to Quadrajet 4-BBL Intake Manifold
MRG1933 Fits Any 4-Bolt, 4-BBL to Any Small 4-Bolt, 2-BBL Manifold and/or 4-Bolt, 2-BBL to Any 4-Bolt, 4-BBL
Manifold (Except Spread Bore Applications) MRG937 Adapts Large Holley 2-BBL to Any Rochester 4-Bolt, 2-BBL Base or Any Rochester 4-Bolt, 2-BBL Carb to
Large Holley 2-BBL Base
MRG1929 Adapts Holley 350/500 2-BBL Carb to Quadrajet
CARBURETOR HEAT DISSIPATORS
• Special heat absorbing material separated by layers of aluminum alloy.
• Allows a cooler, denser fuel mixture to help prevent engine heat-causing vapor locks.
phenolic insert inside, based on manifold.
• An advanced phenolic thermoset plastic withstands high
MRG97 1/4" Holley and AFB
MRG98 1/2" Holley and AFB
MRG98A 1/2" Open
MRG86B 1/2" Rochester Quadrajet
CARBURETOR HEAT SHIELDS
• Helps eliminate fuel boiling/vapor locking in the carb caused by excess heat.
MRG3710 Fits All Holley Exc. 4500 and Carter AFB 4-BBL, 1/2"H MRG3712 Fits All Rochester Quadrajet, 1/2"H
manifold temps. Insulates and reduces the heat flow to carburetors. Fits Holley, Carter and Quadrajets.
MRG6009 Four-Hole Bore Manifold Design
398