Page 394 - VSI Master Catalog

BREATHERS
PUSH-ON VALVE COVER BREATHER
• Chrome plated breather/oil filler cap fits stock OEM oil filler tubes. Works great with Mr. Gasket #2066 custom chrome filler tube.
MRG2060 Push-On Breather
TWIST-ON VALVE COVER BREATHER
• Chrome plated breather cap with or without the embossed Mr. Gasket logo. A high porosity filter plus an internal baffle.
MRG2069 2-3/4” Dia. x 2-1/8” w/ Logo MRG2061 2-3/8” Dia. x 1-3/4” w/o Logo
PUSH-ON PCV OIL BREATHER CAP
• Chrome plated cap with side PCV hook-up tube. Fits stock OEM oil filler tubes.
MRG2063 Oil Breather Cap Push-On Style/PCV
OIL FILLER CAP PLUG
• Chrome plated top with Mr. Gasket logo or oil label in center. Fits valve cover openings with 1.22” dia. hole.
MRG2067 2-3/16" Dia. x 5/8"H w/ Logo MRG9815 2-3/16" Dia. x 5/8"H w/o Logo
TWIST-ON VALVE COVER OIL FILLER CAP
• Chrome plated steel oil filler cap. Fits most twist-on valve covers.
MRG2062 Twist-On Cap
SCREW-ON CHROME PLATED OIL CAP
• Fits most late model GM V6 and V8 cars. Includes O-ring.
MRG9724 Chrome Plated Screw-On Oil Cap
PUSH-ON CHROME PLATED BREATHER
• Mr. Gasket logo on the top. Internally baffled with filter. Fits opening of 1.22” dia. hole in valve cover. Replaces OEM GM breather #6421868 on
65-67 GM big blocks.
PUSH-ON PCV BREATHER
• 3/4” OD mounting tube, internal baffle, filter element. Chrome plated steel embossed with the Mr. Gasket logo on top.
MRG2057 Fits 3/4” Dia. PCV Valve Opening
PUSH-ON MEDALLION-READY BREATHER
• Makes room for a 1-3/4” medallion on top. An internal baffle with high porosity filter fits a .22” dia. opening.
MRG2056 2-1/2” Dia. x 2-1/8”H
CUSTOM CHROME
OIL FILLER TUBE
• Chrome plated steel filler tube.
7-3/4” long. Fits Mr. Gasket breathers #2060 and 2063
MRG2068 2-1/2” Dia. x 2-1/8”H w/ Logo MRG9810 2-1/2” Dia. x 2-1/8”H w/o Logo
MRG2066 Chevrolet Small Block
OPEN ELEMENT BREATHER
• 3-1/8” tall. Chrome plated, 3” dia. OD top cover. Hooded version with chrome plated shroud around half the element. The reusable synthetic filter element is washable.
PUSH-ON STYLE, FITS 1.22" OD HOLE
MRG2048 Hooded MRG2049 Open Element
PUSH-IN CHROME
ALUMINUM BREATHERS
• Ball milled flamed or plain polished chrome.
MRG9115G Push-In Breather, Plain
VENT BREATHER
• 2” dia. For transmissions, rear ends, power steering tanks and overflow bottles. Washable four-layer cotton gauze filter. Fits 8mm/9mm and 3/8” tube sizes.
MRG2043 Aluminum Vent Breather
PCV VALVES
• Fit into a standard 1.22” dia. hole in the valve cover. Billet aluminum. Available in polished, clear or blue anodized finish.
MRG9150G 90o, Polished, 1.22” OD, 3/8” Hose Barb, Each
CRANKCASE EVACUATION SYSTEM
(No Rubber Grommet Included)
PUSH-ON CHROME PLATED BREATHER WITH PCV TUBE
• Features 1” OD neck and a 5/8"
OD breather tube. Breather has
metal/foam baffle inside. Grommet
included. Fits all aftermarket valve covers with a 1.22” dia. opening.
MRG2054 Chrome Plated Breather w/PCV Tube MRG2059 Fits Mopar A, B, RB and Slant 6 Engines
392
• Primarily for drag racing.
• Reduces pressure buildup in the
crankcase and provides better piston ring seal. Two breathers, two grommets, two check valves, two threaded collector tubes (must be welded into collectors).
MRG6002 Crankcase Evacuation System