Page 393 - VSI Master Catalog

AIR CLEANER ADAPTER RINGS
CHROME VALVE COVER WING BOLTS
• Extra long studs for thicker
gaskets and hold down tabs. • Chrome plated for long life. • Four per kit.
STANDARD “Y” TOP
• End air cleaner fitment problems when you change carburetors.
• High impact heat resistance material.
MRG2082 Adapts 5-1/8" Air Cleaner to 4-7/32" Carb Neck
MRG6406 Adapts 5-1/8" Air Cleaner to 3" Carb Neck
MRG6407 Adapts 5-1/8" Air Cleaner to 2-5/8" Carb Neck
MRG6400 Adapts 5-1/8" Air Cleaner to GM Dual Jet Carb
MRG9824 1/4”-20 x 5/8” Thread for Stock Valve Covers–Chevrolet V8
AIR CLEANER RISERS
MRG9826 1/4”-20 x 1” Thread for Custom Stock Covers–V8
Cast Covers, Chrysler Wedge Engines–Stock Corvette
• Allow added clearance between carb and air cleaner for carb linkage. Fit 2- and 4-BBL carburetors with 5-1/8” necks.
64-Up, Stock Ford V8, 260-289-302 cu. in. MRG9829 5/16”-18 x 1” Thread for Cast Covers–Ford V8,
MRG9340 5-1/8" Neck x 1/2” Tall
MRG9341 5-1/8" Neck x 1” Tall
MRG9342 5-1/8" Neck x 1-1/2” Tall
HOOD PIN KITS
HOOD AND DECK PINNING KITS
• Competition hood pin kit for quick removal of hood. Includes chrome safety pins, scuff plates, hood pins, lock nuts, screws. 4” overall pin length; 2-1/2” dia. scuff plates.
With Screw-On Scuff Plates
MRG1016 7/16”-20 Thread, Safety Pins
MRG1017 7/16”-20 Thread, Torsion Clips
MRG1018 1/2”-20 Thread, Torsion Clips (NASCAR Style)
With Self-Adhesive Scuff Plates
MRG1216 7/16”-20 Thread, Safety Pins
MRG1217 7/16”-20 Thread, Torsion Clips
MRG1218 1/2”-20 Thread, Torsion Clips (NASCAR Style) Replacement Clips
MRG1016A 2 Safety Pins
MRG1017A 2 Torsion Clips
Replacement Wire Lanyard Cables
MRG1213 24” Competition-Style Lanyard Cables (2 pcs.) Replacement Scuff Plates, 2-1⁄2" Dia.
MRG1219 Self-Adhesive, Used in Kits 1216, 1217, 1218 MRG1618 Screw-On, Used in Kits 1016, 1017, 1018, 1616, 1617
SECURITY HOOD PIN LOCK KIT
• Two keys and two chrome plated lock sets with fully threaded lock pins.
Used with your OEM hood latch system. Not for use as your only hood retention.
MRG1472 Super Security Lock Kit
VALVE COVER ACCESSORIES
DELUXE TOP
MRG9827 1/4”-20 x 5/8” for Stamped Covers
MRG9828 1/4”-20 x 1” for Cast Covers
VALVE COVER SPEED STUD
• Hand-tight is not enough for added sealing with vacuum systems. 1/2”
nut style for use with a 1/2” socket
for speed tightening. Clear anodized aluminum body, 4-3/8” long, with 1-1/2” steel set screws.
MRG6305 4-3/8”L (2/Kit)
352-390-427 cu. in.–Pontiac V8 55-Up
CHROME PLATED VALVE COVER ACORN NUTS
• Chrome plated solid steel. 1-3/8” tall with
1/4”-20 threads inside. Includes 8 nuts with eight 1/4” set screw studs.
MRG6304 Valve Cover Acorn Nuts
CUSTOM VALVE COVER NUTS
• 1/2” billet aluminum with knurled top. 3/16 socket head. Three colors.
MRG5336 Blue Anodized, 2” Tall, 1/4”-20 Set Screw Studs (4/Set)
VALVE COVER
HOLD-DOWN BRACKETS
• Helps prevent oil leakage from stamped valve covers. Tighten valve covers without bending the flange.
HOLD DOWN BOLTS,
T-BAR STYLE
• Chrome plated steel wing bolts with extra
MRG3681 8/Kit w/1/4” Dia. Holes
VALVE COVER CLAMPS
• Chrome plated thick steel hold-down clamps. Tighten valve covers without bending the flange. Longer style for use with four cover bolts. Smaller style for when over four bolts are used.
MRG9817 Competition, Long Style, 4/Set
MRG9899 Custom, Short Style 8/Set
MRG9887 1/4"-20 x 3/4" Chrome Plated Hex Head Bolts
long studs for thick valve covers. Three lengths for short or tall covers.
MRG9818 T-Bar Wing Bolts 3-1/2”L, 1/4”-20 Thread, 4 pcs. MRG9820 T-Bar Wing Bolts 5”L, 1/4”-20 Thread, 4 pcs. MRG9823 T-Bar Wing Bolts 5-3/8”L, 5/16"-18 Thread, 4 pcs.
with Short Style Hold Down Tabs, 8/Set
391