Page 370 - VSI Master Catalog

ANTI-ROLL KITS
• Each kit features a totally rebuildable solenoid valve, heavy duty push-button switch, extruded switch bracket, coiled wire, rebuildable line lock valve, fuse holder, and indicator light.
MOR44050 Anti-Roll Kit
NOTE: Continuous use of solenoid for more than 30 seconds will damage the coil.
ENGINE TOOLS
HARMONIC BALANCER INSTALLATION TOOLS
• These Moroso harmonic balancer tools
use a pilot stud, which keeps the
harmonic balancer perpendicular to the crankshaft’s centerline, for a bind-free installation.
TRICK FRONT SPRINGS
• Designed for Drag Racing where maximum weight transfer is needed.
• Replaces stock OEM springs with no modifications required.
• Two Per Package.
• Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
MOR61740 MOR61741 MOR61744
SBC, or any Engine with a 7/16” -20 Threaded Hole in the Crank
BBC or any Engine with a 1/2” -20 Threaded Hole in the Crank
Universal, Includes Screw-in Inserts for 7/16”, 1/2”, 5/8” and 3/4” Threaded Openings
Coil
Front End
Spring
Make/Model
Year
Weight (Lbs.)
Lbs./in.
Part #
Buick
Apollo
1968-74
1550 - 1640
213
MOR47150
Special, Skylark,
1964-67
1700 - 1750
241
MOR47165
GS, Regal
1730 - 1790
250
MOR47195
Chevy
150, 210, Bel Air
1955-57
1550 - 1640
213
MOR47150
HARMONIC BALANCER INSTALLATION AND REMOVAL TOOL KIT
• Four heat-treated chrome moly inserts
Camaro
1967-69 1550 - 1640 213
MOR47150
(1/2”, 7/16”, 5/8” and 3/4”) fit most
popular engines.
• Roller thrust bearing allows drive nut to
Chevy II, Nova 1962-67 1200 - 1250 217 MOR47230
Chevelle, Malibu, 1964-67 1550 - 1640 213 MOR47150
Monte Carlo 1690 - 1750 240 MOR47140
Oldsmobile
Cutlass, 442 1968-72 1610 - 1680 242 MOR47160
Omega 1690 - 1750 240 MOR47140
Pontiac
Firebird 1967-69 1690 - 1750 240 MOR47140
1700 - 1750 241 MOR47165
1730 - 1780 250 MOR47195
Firebird 1970-81 1910 - 1970 230 MOR47175
1840 - 1910 212 MOR47180
2010 - 2100 270 MOR47170
Firebird 1982-92 1680 - 1750 220 MOR47210
1750 - 1870 250 MOR47215
Tempest, LeMans 1968-72 1680 - 1750 250 MOR47190
GTO, Grand Prix 1969-72 1750 - 1810 260 MOR47200
1978-88 1600 - 1660 212 MOR47130
1660 - 1720 242 MOR47205
1720 - 1800 250 MOR47135
Ventura 1975-79 1700 - 1750 241 MOR47165
1730 - 1790 250 MOR47195
1840 - 1910 212 MOR47180
1910 - 1970 230 MOR47175
2010 - 2100 270 MOR47170
Ford
Mustang 1965-76 1610 - 1680 242 MOR47160
rotate freely so the balancer is pressed on
or pulled off smoothly and evenly. • Black oxide finish.
Mustang
Mercury Comet, Mercury Capri
1979-04 1750 - 1900 250
1966-69 1750 - 1810 260 1650 - 1750 200 1550 - 1650 175
MOR47220
MOR47200 MOR47221 MOR47222
MOR61743 Chevy, Ford, Mopar, KB Hemi, Pontiac, Oldsmobile and Buick
ENGINE CLEANING BRUSHES
• Each brush is designed for a specific purpose.
• Can also be used on crankshaft
oil holes, cylinder heads, etc;
bristles are made of nylon which
cleans as well as wire but does not scratch.
• Set of 12 brushes.
MOR61820 Engine Cleaning Brushes
CRANKSHAFT SOCKET TOOLS
• Designed to simplify the task of crankshaft rotation during short block assembly with the balancer removed.
• Manufactured of tool quality steel with gold iridite finish.
• Accepts 1/2” drive.
Fairlane
1966-70
1680 - 1750
250
MOR47190
TRICK REAR SPRINGS
• CNC wound from high strength chrome silicone wire.
• Gives more balanced weight transfer, features a stronger right rear spring.
• More consistent 60 foot times.
MOR61760
MOR61765 MOR61770 MOR61790
Small Block and 90° V6 Chevy and Super-Duty Pontiac/GM 4 Cyl.
LS Series Engines with Keyway, zinc-plated finish Big Block Chevy
All Small Block Ford, Buick and Pontiac
MOR47500 MOR47520 MOR47510
368
1968-72 A-Body 1978-87 GM A/G Body 1979-93 Mustang