Page 367 - VSI Master Catalog

ULTIMATE-DUTY BALANCER BOLT KITS
• The thicker 3/4” hex head on this 7/16”-20 x 2-1/4” balancer bolt provides a larger contact surface
for more positive socket engagement.
• Especially important when crankshaft is being
rotated by hand with the use of a socket and power bar or ratchet handle.
• Manufactured of Grade 8 steel with gold iridite finish. MOR38775 BBC, 1/2” -20 Threads
BALANCER BOLT
• The thicker 3/4” hex head on this 7/16”-20 x 2-1/4” balancer bolt provides a larger contact surface for increased positive socket engagement.
• Important when crankshaft is being rotated by hand with the use of a socket and breaker bar or ratchet handle.
• Manufactured of Grade 8 steel with gold iridite finish. MOR38770 Small Block Chevy
TORQUE CONVERTER BOLTS
• Specially designed fasteners provide maximum holding strength and eliminate the possibility of shearing.
QUICK RELEASE HOOD PIN SET
• A quick, self-contained hood clamping device. • No pins or lanyards to lose or cause
hood damage.
• 3/8” diameter aluminum pins; easy bolt-on
installation may be used for many other applications where
quick access to a trouble spot is absolutely essential. • Two per set.
MOR39010 Quick Release Hood Pin Set
OVAL TRACK HOOD PIN SETS
• Consists of 3/8” Dia. chrome
plated steel pins with clips, 1-1/2” Dia. stainless steel scuff plates and vinyl-coated stainless steel lanyards.
• Ideal for any full-bodied race cars. • Two per set.
MOR38764 MOR38765
Grade 8 Bolts with Nuts for Turbo 350, 400 Flex Plates without Tapped Holes, 3/8” -24 x 5/8”. 3/pk Grade 5 Bolts for Turbo 350, 400 Flex Plates with Tapped Holes, 3/8” -16 x 5/8”. 3/pk
CHROME HOOD PIN SET
• Hood Pin Sets consist of two
chrome plated steel hood pins
(5” long with 3” of thread), two 1/8”
hitch pins, four cadmium-plated mounting nuts, two scuff plates, two 12” vinyl-coated stainless steel lanyards and two rivet eyelets.
MOR39016
4” Hood Pin Set
FLYWHEEL/FLEX PLATE BOLTS
• Bolts manufactured using Grade 8 steel and heat treated for maximum strength.
• Black oxide finish provides corrosion resistance.
QUICK FASTENERS AND SPRINGS
QUICK FASTENERS
• Provide quick fastening of body panels, door, tilt front ends, fiberglass to metal, metal to metal, etc.
• Available in four lengths and three head styles.
FIREWALL GROMMETS
• Black, thermoplastic rubber grommets will fit five different size holes for wires and cables passing through the firewall.
• They not only insulate, but provide mechanical protection against chafing.
• Outside dimensions range from 1/2” to 1”, the inside from .41” to .89”.
• Package of 25; five of each size.
Steel
MOR71270 MOR71271 MOR71280 MOR71290 MOR71300 MOR71310 MOR71350 MOR71360 MOR71340* MOR71341* MOR71349 MOR71359 Aluminum MOR71301 MOR71302 MOR71312 MOR71351 MOR71353 MOR71363
Butterfly Head Fastener, 7/16” x .450” Short Body Butterfly Head Fastener, 7/16” x .500” Medium Body Flush Head Fastener, 7/16” x .400” Short Body Flush Head Fastener, 7/16” x .450” Short Body Flush Head Fastener, 7/16” x .500” Medium Body Flush Head Fastener, 7/16” x .550” Long Body
Oval Head Fastener, 7/16” x .500” Medium Body Oval Head Fastener, 7/16” x .550” Long Body Oval Head Fastener, 5/16” x .400” Short Body Oval Head Fastener, 5/16” x .300” Short Body Oval Head Fastener, 7/16” x .400” Short Body Oval Head Fastener, 7/16” x .450” Short Body
Flush Head Fastener, 7/16” x .500” Flush Head Fastener, 7/16” x .400” Flush Head Fastener, 7/16” x .450” Oval Head Fastener, 7/16” x .500” Oval Head Fastener, 7/16” x .400” Oval Head Fastener, 7/16” x .450”
MOR39020
Heavy-Duty Hood Pin Set, 1/2” Dia. Pins
MOR38760
SBC, BBC and 90o Chevy V6 Engines, 7/16”-20 x 3/4”, 6 Bolts and Washers Per Pack
MOR39050
Firewall Grommets
HOOD PINS
LIGHTWEIGHT ALUMINUM HOOD PIN SET
• Set consists of two 3/8” diameter pins with all necessary mounting hardware.
MOR39000
Aluminum
365