Page 353 - VSI Master Catalog

BILLET ALUMINUM OIL PUMPS
SPUR GEAR, HIGH VOLUME
STEEL OIL PUMPS
HEAVY DUTY RACING OIL PUMPS
• Moroso engineers’ anti-cavitation grooves into the pump housing to prevent pump chatter, which will lead to broken pick-ups and inconsistent oil pressure.
• 6061-T6 billet housing with 3 times larger mounting boss area to prevent breaking.
• Weight 1 lb. less than stock oil pump with pick-up.
• Inlet area is increased to prevent cavitation.
• Anti-cavitation slots are machined to bleed oil back to the inlet side of the pump, and an enlarged bypass area ensure a smooth flow rate throughout any RPM range.
• Thrust bearing assembly increases housing and gear life due to drive shaft axial forces on the drive gear.
SBC
4-1/4” Stroke, For 8-1/4” deep oil pans
4-1/4” Stroke, For 8” deep oil pans
4-1/4” Stroke, For 8” deep oil pans, Std Vol.
SBC
MOR22101 MOR22111 BBC MOR22150 MOR22160
MOR22171
Standard Volume High Volume
Standard Volume High Volume
BBC
MOR22163 MOR22164
BBC GEROTOR PUMP, HIGH VOLUME
• Dual feed inlets, an adjustable by-pass, and Hard-Coat finish.
BLUEPRINTED RACING OIL PUMP
• Precision machined 6061-T6 billet aluminum body with a mounting boss cross section is 5.7 times that of
a stock pump to eliminate vibration and fatigue failures.
• Anti-cavitation slots and enlarged feeder grooves are ball milled smooth, providing steady oil flow to each side of the gears for high RPM lubrication, cavitation relief and reduced spark scatter.
• Supplied with a mounting stud and intermediate shaft.
• Distortion-free cast iron housing resists wear after extended use. Parkerized coating retains oil for extra lubrication during break-in and cold starts.
MOR22167
Oil Pump, BBC, High Volume
OIL PUMP / PICKUP COMBINATIONS
• Package includes the Moroso pick-up
MOR22162 Blueprinted High Vol. Racing Oil Pump, BBC
ExTERNAL OIL PUMP PICKUP KIT
welded to the oil pump for a simple
bolt-on installation.
• Pick-up orientation ensures 1/4”
• Complete kit includes everything needed to convert steel wet sump oil pan for use with external pump.
clearance from pick-up to bottom
of any Moroso oil pan.
• Oil pump is not modified internally.
• Includes screened pickup box, pickup tube and specially machined
SB Chevy
MOR22139 MOR22124 MOR22134 MOR22146 MOR22144 MOR22147 BB Chevy MOR22175 MOR22185 MOR22187 MOR22186 MOR22195
For 8-1/4" Deep Oil Pan, High Vol., 3/4" Inlet For 8-1/4” Deep Oil Pan, Std Vol.
For 8-1/4” Deep Oil Pan, High Vol.
For 8-1/2” Deep Oil Pan, High Vol., 3/4" Inlet For 7-1/2” Deep Oil Pan, High Vol.
For 7-1/8” Deep Oil Pan, High Vol., 3/4" Inlet
For 8” Deep Oil Pan, Std Vol.
For 8” Deep Oil Pan, High Vol.
For 8” Deep Oil Pan, High Vol., w/ Windage Tray For 8” Deep Oil Pan, High Vol.
For 7-3/4” Deep Oil Pan, High Vol.
-12 AN fitting.
• Adapts to a variety of pans, welding required.
• Recommended for “Eliminator” Wet Sump Pans
with Power Kickouts. MOR24840 For Steel Oil Pans
OIL PUMP PICKUPS AND ACCESSORIES
U-WELD-IT ExTENDED OIL PUMP PICKUPS
OIL PUMP, LS-1 HV WET SUMP
• Can be tailored for either standard or high volume pumps.
• Volume will increase by 18% over stock oil pumps.
• Use in oil pans up to 10-3/4” deep.
• Hard anodized coating for wear and performance.
• Intended for Street/Strip use.
• Will fit with stock timing cover.
Small Block and 90° Chevy V6
MOR22120* Oil Pump, LS-1
* Use with Moroso pan MOR20140, MOR20141 and MOR21150
MOR24861 Includes: One 5/8” Tube, One Bracket, One Box, Two 1/4” - 20 x 3/4” Allen Head Screws, Two Hex
Big Block Chevy
Head Cap Screws and Two 1/4” Lock Washers
MOR24862 Includes One 3/4” Tube, One Bracket, One Box
351