Page 297 - VSI Master Catalog

LADDER BARS
• Designed to eliminate wheel hop, strengthen rear suspension.
• Complete bolt-on installation, no welding required
LAKEWOOD MUSCLE MOUNTS
• Offers the advantages of stamped steel motor mounts without the typical noise
and vibration associated with solid mounts.
• The heavy gauge steel frame and engine
brackets are vulcanized to a hard durometer
rubber and feature a safety interlock design where applicable, eliminating the need of torque straps. 1/box pkg.
LAK20460 LAK20462
65-72 GM Coil Spring Cars 70-81 Camaro
TRACTION BAR WEDGES
• Locates between the spring and traction bar for added clearance between snubber and leaf spring.
• Can be used to pivot axle housing for correct pinion angle on leaf spring cars and trucks.
Left
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24087
LAK24084
LAK24084 LAK24087
LAK24084 LAK24087 LAK24084
LAK24094
LAK24094
LAK24094 LAK24094 LAK24094
improved handling on the strip or when quick front end lift is not needed. Works best on medium to high horsepower vehicles with wide front tires.
• 50/50 Series Rear (Street/Strip): Used properly to load the rear tires and prevent over-reaction and wheel hop.
• 70/30 Series Rear (Street/Strip): Used when rear body lift is desirable with minimum resistance without causing excessive stiffness which can lead to wheel hop.
Maximum traction without front-to-rear weight transfer. Boxed Packaged Individually
Application
Chevy Full Size
67-72 Full Size 350-454
58-66 Full Size 283-348
Camaro
72-71 Camaro 400
70-71 Camaro 307, 350 (exc HP) 70 Camaro 350 HP engine
68-70 Camaro All
69 Camaro 302, 350, 396 HP
69 Camaro 307, 327 HP
67-69 Camaro 427
Chevelle
69-72 Chevelle 350-454
69-72 Chevelle 307
64-68 Chevelle 283, 327* Chevy/Nova
72 Nova 350
70-72 Nova 307, 350
69-71 Nova 350, 396, 454
64-68 Chevy II, Nova 283, 327 Ford Fairlane, Torino, Montego 66-71 289, 302, 351 (conv. only) 70-71 302, 351 (exc. conv) 66-69 289, 302, 351
Falcon, Comet
66-70 289, 302
Mustang, Cougar
66-71 289,- 351C &W
Right
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24084
LAK24087
LAK24087
LAK24084
LAK24084 LAK24087
LAK24084 LAK24087 LAK24084
LAK24094
LAK24094
LAK24094 LAK24094 LAK24094
LAK20500 LAK20504 LAK20510
2° Wedge, Narrow, Pair 4° Wedge, Wide, Pair 4° Wedge, Narrow, Pair
TRACTION BAR RUBBER SNUBBERS
• Replacement rubber snubbers
used on all Lakewood traction bars.
LAK20530 LAK20534
Rubber Snubbers, Pair
Rubber Snubbers for LAK20470/LAK20475
TRACTION BAR U-BOLT KITS
• Fits Lakewood Traction Bars and many other bars used on leaf spring cars.
• Kit includes (2) high quality zinc-plated U-bolts with eight nuts and lock washers.
LAK20570 U-Bolt kit, 3-1/2” LAK20571 U-Bolt kit, 3-1/8”
DRAG SHOCKS AND STRUTS
• 90/10 Series Front (Race Only):
• Provides excellent weight transfer on launch
which brings the front end up quickly while
TRACTION BAR J-BOLT KITS
keeping the rear tires planted for maximum traction. • 70/30 Series Front (Street/Strip): Used for overall
• For use with street/strip traction bars to set the pre-load for instant lift.
• For track use only.
LAK20580
J-Bolt kit, 1-1/2” Bar
DRIVE SHAFT SAFETY LOOP
• Made from 1/4” thick steel.
• Custom tailored to fit Mustangs and Camaros.
• Zinc-plated.
• Required by all racing sanctions on all manual transmission
Application
AMC
68-69 Javelin, AMX
70-74 Javelin, AMX 64-69 Javelin, AMX
Front Front 70/30 90/10
LAK40103
Rear Rear 50/50 70/30
LAK40301
LAK40301 LAK40301
Continued on next page
cars using drag slicks, and street slicks.
LAK18017 LAK18022 LAK18020 LAK18000
97-01 Mustang
93-02 Camaro/Firebird 82-92 Camaro/Firebird Universal
70-78 Matador, LAK40103 LAK40301 Rambler
295