Page 174 - VSI Master Catalog

FUEL PUMPS, MECHANICAL
qUIET-FLOTM ELECTRIC FUEL PUMPS
PERFORMER RPM SERIES 110 GPH
FUEL PUMPS
• Supports engines up
rotors give these pumps the added boost
to 600 HP.
• High-volume, 3/8” NPT inlet/outlet.
• Produces 6 PSI and does not require a regulator.
• Use with gasoline only.
• Clockable lower housing can be rotated for best inlet/outlet
close to the fuel tank as possible, at or below the fuel level.
alignment.
EDL1721 For SB Chevrolet
EDL1722 For BB Chevrolet
EDL1720 For SB Chrysler EDL1723 For BB Chrysler EDL1725 For 289-351W Ford EDL1724 For 360-428 FE Ford EDL1726 For 429/460 Ford EDL1713 For Pontiac V8
EDL1791 120 GPH (Free Flow), Up to 600 HP, 3/8” NPT Ports, For Carbureted Applications, 6.5 PSI
EDL1792 160 GPH (Free Flow), Up to 1000 HP, 1/2” NPT Ports, For Carbureted Applications, 12 PSI
• Manufactured by Essex Industries.
• The carbon fiber vanes and composite
for maximum performance.
• High quality construction results in a pump
that is 4 to 14 dB quieter than competitors
pumps at the same pressure.
• These pumps should be mounted as
ELECTRIC FUEL PUMPS FOR EFI APPLICATIONS
• Manufactured by Essex Industries. • Anodized aluminum housings
and high-quality internals.
• Each pump is factory-tested and
VICTOR SERIES
130 GPH FUEL PUMPS • High-volume, 3/8” NPT
EDL1790 80 GPH at 45 PSI, -10 AN Inlet/Outlet
for EFI Applications Dimensions: 6-7/8” x 3-1/4”
EDL1794 120 GPH at 45 PSI, -12 AN Inlet/Outlet for EFI Applications Dimensions: 7” x 3”
UNIVERSAL FUEL PUMP RELAY KIT
• Assures proper voltage to the fuel pump at all times, for consistent and accurate fuel pressure.
• Each kit is complete with: 18’ of 12-volt activation wire lead, 18’ of 12-volt battery
wire lead, 18’ fuel pump 12-volt lead, 18’
of ground wire lead, 30-amp weather
resistant Bosch relay, and complete instructions.
EDL1795 Fuel Pump Relay Kit
FUEL PRESSURE REGULATOR KITS FOR HOLLEY STANDARD-FLANGE DUAL-FEED OR 4500 SERIES CARBS
• Allows for the adjustment of fuel
pressure from 4-1/2 to 9 PSI.
• Kits include fittings, mounting plate,
fuel line and regulator.
EDL8192 Single Regulator,
Dual Outlet, Standard-Flange
BOTTOM FEED FUEL PUMP PLATE KITS
• Allows you to use a 6-valve fuel pump on vehicles where you don’t have room to spare.
• Include an aluminum plate, along with all of the necessary gaskets and plugs.
• Replaces the lower section of the fuel pump and allows bottom-feed fuel line fittings. Will not affect the flow or pressure ratings of the fuel pump.
EDL1797 Bottom Feed Fuel Pump Plate Kit, 3/8”
EDL1798 Bottom Feed Fuel Pump Plate Kit, 1/2”
inlet/outlet.
• Produces 10 PSI and must
be used with an external
fuel pressure regulator.
• For gasoline only.
• Clockable lower housing can be rotated in 60° Increments
EDL1711 For SB Chevy
EDL1712 For BB Chevy
FUEL PUMPS, ELECTRIC
includes mounting brackets.
for best inlet/outlet alignment.
FUEL PRESSURE REGULATOR FOR CARBURETED APPLICATIONS
• Manufactured by Essex Industries,
machined from aircraft quality aluminum and has a fluorosilicone diaphragm material for extended life and high temperature protection.
• Compatible with all grades of gasoline/ methanol. 1/8” NPT gauge ports.
• Mounting bracket and hardware are included.
• 3/8” NPT inlet/outlets and is adjustable from 5 to 10 PSI
providing extremely consistent pressure regulation for carbureted applications.
EDL1727 160 GPH w/ Single 3/8” NPT Inlet and Dual 3/8” NPT Outlets for Carbureted Applications
172