Page 173 - VSI Master Catalog

AIR/FUEL RATIO MONITOR
HIGH FLOW FUEL FILTERS
• Designed for high volume fuel
systems these high-quality fuel
filters are manufactured of billet aluminum and offer 40 micron filtration.
• Include a 40 micron disc element with a -6 AN male inlet/outlet.
• Match with Edelbrock pump-to-carb fuel line kits for a complete plumbing solution.
EDL8129 Polished Aluminum Filter, Dim.: 3”L x 1.25”W EDL8130 Blue Anodized Aluminum Filter
DUAL-qUAD FUEL HOSE KIT
• Supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad
manifolds.
• 6-7/16” center-to- center, 1/8” NPT fuel pressure port and a 3/8” NPT fuel inlet.
EDL8088 Dual-Quad Fuel Line Kit
EDL8091 Dual-Quad Fuel Line Kit (Endura Finish)
UNIVERSAL FUEL HOSE & FILTER KIT
• Displays the actual air/fuel mixture in ratios from approximately 12 to 15:1. • Use it to guide carburetor adjustment
and jetting or to improve ignition
spark advance curves.
• Not for use with leaded fuels or alcohol.
• Kit includes oxygen sensor, bung, harness, display unit
and installation instructions. EDL6593 Air/Fuel Ratio Monitor
FUEL INLET AND FILTER KITS
SINGLE FEED FOR EDELBROCK PERFORMER SERIES AND
THUNDER SERIES AVS CARBURETORS • The drop-down design routes
the fuel line on the right-hand (passenger side) of the carburetor
below the linkage and choke housing.
• The #8131 and #8134 include an
aluminum fuel filter with a 40 micron filter element and
-6 AN male inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution.
• They are manufactured of chrome plated steel and include a 5/8” -20 threaded banjo bolt with gaskets.
EDL8126 Chromed Steel Fuel Line w/o Fuel Filter and 3/8” Barbed End Inlet
EDL8131 Single-Feed Fuel Line with Polished Aluminum Filter EDL8134 Single-Feed Fuel Line with Blue Anodized
DUAL FEED FOR EDELBROCK THUNDER SERIES AVS CARBURETORS • Designed specifically for
• Will work with either 5/16” or 3/8” lines. • Kit includes fuel filter, special
Aluminum Filter
fittings to adapt 5/16” and 3/8” steel line to 3/8” fuel hose, 24” of 3/8” fuel hose (SAE 30R7) and four stainless steel worm- type hose clamps.
Edelbrock Thunder Series
FUEL PUMP TO CARB INLET HOSE KITS FOR EDELBROCK FUEL PUMPS
WITH 3/8” OUTLET
• For mechanical fuel pumps with 3/8”
• Chrome plated steel; Includes 5/8” -20 threaded banjo bolt with gaskets.
EDL8133 Dual-Feed Fuel Line with Blue Anodized Aluminum Filter (Replacement Filter Only #8130)
EDL8128 Dual-Feed Fuel Line with Polished Aluminum Filter (Replacement Filter Only #8129)
CARBURETOR ADAPTERS
• Carb adapters allow proper installation of carb-to-manifold.
• Number in parenthesis is thickness of adapter.
EDL2692 4-bbl. Quadrajet Adapter
EDL2696 Four-hole, Square-Bore to Spread-Bore Adapter EDL8716 Standard-Flange Adapter
EDL2731 Spread-Bore Adapter Plate
EDL2732 Square-Bore to Spread-bore Adapter Plate
4-BARREL CARBURETOR SPACERS
• 4-hole spacers enhance low-rpm
EDL8135 Universal Fuel Hose & Filter Kit
AVS carburetors.
• The dropdown design routes
NPT outlet, when using an Edelbrock Single-Feed or Dual- Feed fuel inlet kit #8128, 8131, 8133 or 8134.
the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing.
• Pre-assembled hose with hose ends.
EDL8123 For S/B Chevy, S/B Chrysler, and B/B Chrysler
EDL8124 For AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac
torque and throttle response and dampen reversion effects on the carb.
EDL8710 1” Open Spacer, Black Phenolic Plastic
EDL8711 1” 4-hole Spacer, Black Phenolic Plastic
EDL8717 1” Open Spacer for Holley 4500 Series
EDL8718 1” Open Cloverleaf Spacer for Holley 4500 Series;
Fits 2937, 2965, 2956, 2970 & 2971 Only EDL8714 1” Performer Divided-Wall Spacer,
for Two-Plane Manifolds
EDL8712 2” Open Spacer, Black Phenolic Plastic
EDL8713 2” 4-hole Spacer, Black Phenolic Plastic
171