Page 482 - VSI Master Catalog

universal push roD sTraighTness checker
• Checks concentricity to discard any
spark plug inDexing Tool
power-robbing, bent push rods. Insert
pushrod between spring-loaded holders, spin the pushrod and read the re-positional dial indicators (.001).
• High compression engines run better with the spark plugs indexed. Spark plugs can be properly set so there is no piston dome interference.
PFM66979 Universal Straightness Checker
Deck BriDge
• Dial indicator stands will fit over any cylinder bore up to 4.500ˮ They are designed to check piston-to-deck clearance, as well as
the piston position at top dead center.
aDJusTaBle DigiTal valve spring pressure TesTer
• Features a digital gauge and an adjustable
PFM66795 Spark Plug Indexing Tool
PFM66797 PFM66798
Magnetic Deck Bridge
Deck Bridge w/o Magnetic Base
• Made of black anodized billet aluminum with a knurled grip area for ease of use. Capacity range from 0-600 lbs.
PFM67601 Digital Valve Spring Tester
sTuD MounT valve spring coMpressor
• For all 3/8” and 7/16” rocker studs. Remove valve spring from an assembled engine for checking or replacing quickly and easily. Press down to compress coil spring, then remove valve keepers. Release slowly.
PFM66784 Spring Compressor
Mini spring TesTers
• Portable way to test springs. The hex-design is versatile: use it in a vise or an arbor press.
• Supplied complete with a recalibration feature
PFM66834 0-700 x 10lb Spring Tester PFM66835 0-300 x 10lb Spring Tester
heavy DuTy roD spliTTing fixTure
• Quickly separate the cap from the rod without damage. Simply loosen the rod nuts a couple of turns, place the rod onto the
splitting fixture and pull the handle.
PFM66773 Rod Splitting Fixture
universal caM checker Tool
aDJusTaBle pushroD lengTh checker
• Measure the proper pushrod length with these simple length checkers.
base to fit all common aluminum rocker lengths and offsets. The digital gauge includes 5-lb. increments with peak hold and backlighting features.
PFM67560 PFM67561 PFM67562 PFM67563 PFM67564
Length Checker, 6.125" - 7.500" Length Checker, 7.500" - 8.700" Length Checker, 8.500" - 9.800" Length Checker, 9.700" - 11.00" Length Checker, 10.200" - 11.500"
Top DeaD cenTer locaTor
• This tool provides a positive stop for the pis- ton when locating top dead center. It screws into the spark plug hole.
PFM66792 Chevy TDC Locator
Top DeaD cenTer locaTer
• Easily checks top dead center by bolt- ing down across cylinder bore. (Used w/ heads off)
PFM66799
Chevy TDC Locator
caM checking fixTure
• Includes 0-1.000” Dial Indicator 66962 (0.001”)! No more fumbling with a magnetic base and a dial indicator to measure cam lift.
• Maintains and holds the dial indicator and 5” extension (included) in the correct position over the lifters, assuring proper geometry. Supplied with 1/2” and 7/16” adapters for use with any engine block.
PFM66830 Cam Checking Fixture
• This easy-to-use tool simply slides down into the lifter bore and is adjusted until expanded securely. Supplied with two followers:
one for flat tappet cams and one for
heavy DuTy valve spring coMpressor
caM checker Tool
• Includes 0-1.000” Dial Indicator 66962 (0.001”)!
With O-rings on each end to assure securing
positioning, this unit slides down into the
lifter bore and sits atop the camshaft for
accurate measurement of lobe lift and base circle
runout. Supplied with two followers, one for flat tappet or hydraulic cams, and the other for roller cams. Designed for GM (.842” dia.) and Ford (.875” dia.) applications.
PFM66838 Universal Cam Checker Tool .750 to 1.050
• This heavy duty, simple-to-use, manual valve spring compressor makes short work of even monstrous springs. The compressor arm slides for adjustment, employing a locking pin for rapid, easy operation.
roller cams.
PFM68902 Universal Cam Checker Tool .750 to 1.050
PFM66832 Valve Spring Compressor
480