Page 444 - VSI Master Catalog

nos reMote Bottle ValVe
• Open and close your nitrous bottle from the comfort of the drivers seat.
saFetY BloW DoWn tuBe
• This tube is a direct replacement for the
standard pressure relief cap on your
bottle. Requires -8 AN safety fitting, sold separately.
NOS16160 Safety Blow Down Tube
nitrous Bottle Pressure BloW-oFF aDaPter
• These Nitrous Oxide System safety discs
NOS16058 NOS14168
Remote Bottle Valve, Solenoid Style
Remote Bottle Opener, Hi-Flow &
Super Hi-Flow Valves, Physically Turns Valve
hi-Flo/ suPer hi-Flo Bottle ValVes
• Add a couple 10ths by adding an NOS Hi-Flo bottle valve. Supports up to 500 HP systems. The Super Hi-Flo
valve orfice flows 24% more than the standard
industrial valve. Supports over 500 HP systems.
are designed to burst at 3,000 PSI and empty
the contents of the bottle through the diffuser
nozzle. They should be replaced each time the bottle valve is changed or reattached.
hi-Flo
NOS16140 NOS16145
Hi-Flo Valve for 10-lb. bottle Mini Hi-Flo Valve for 1-lb., 2-lb & 2.5-lb. bottles
NOS16152 NOS16154 NOS16168
NOS16169
Fits 10-oz., 1-lb., 2-lb., & 2.5-lb. Bottles
SM Hi-Flow Safety Valve - 3rd Generation 2nd/3rd Generation Sniper/Hi-Flo/Super Hi-Flo Bottle Valves
-8 AN for 2nd/3rd Generation Hi-Flo and Super Hi-Flo Bottle Valves
suPer hi-Flo
NOS16139 Super Hi-Flo Valve for 10-lb., 7” dia., 21” tall bottle
injector Plates
• NOS Injector Plates assure a steady, precise metered flow of nitrous and
fuel for reliability. Available for those
who want to build their own system or upgrade their current nitrous system without going through the expense of a new complete system.
• Incorporates a low profile design and are constructed of die cast, solid aluminum with a black powder coat finish. Included are all applicable gaskets, studs, jets
and plumbing.
loW Pressure Fuel PuMP
• High flowing, low pressure pump that will sup- port up to 200 horsepower. It has a 5/16” inlet/ outlet, 12-volt/5-amp rated. Flow rate: 18 GPH at 4 PSI, 5.5 PSI maximum.
NOS15760 Low Pressure Fuel Pump
electrical sWitches, coVers, relaYs
NOS15606 NOS15610 NOS15618 NOS15640 NOS15651 NOS15660 NOS15662 NOS15750 NOS15982
nitrous reFill PuMP station
• Comes complete with all the plumbing, hoses, gauge, valve, fittings and bottle stand necessary to transfer nitrous from a mother cylinder to the receiving bottle instantly.
• NOS offers a water separator with a built-in pressure regulator/filter. It is recommended for use with our pump (P/N 14250NOS
is shown in photo, but not included
NOS12500 NOS12510 NOS12530 NOS12610 NOS13434 NOS13435
Cheater Injector Plate, Holley Square Bore
Big Shot Injector Plate, Holley Square Bore
Super Power Shot Injector Plate, Holley Square Bore Big Shot Injector Plate, Holley Dominator
LS1 OEM Fuel Injection Plate
LS2 OEM Fuel Injection Plate
Nitrous Cover Switch (Aircraft Missile Arming Style) Push Button (Momentary) Switch
30 Amp Relay Assembly
Micro Switch and Bracket
Remote Nitrous Push Button (Waterproof)
7 PSI Adjustable Pressure Switch (Normally Open) Launcher USB Cable 6'
Fuel Pressure Safety Switch 5 PSI (Normally Open) 2-Stage WOT/RPM Activated Window Switch
nos nitrous anD Fuel Filters
• NOS filters feature an aircraft type stain- less steel mesh filter to keep contami- nants from attacking the solenoid and plugging the jets
niitrous Filter
NOS15550 NOS15552
NOS15560 NOS15564 NOS15570 Fuel Filter NOS15571 NOS15569
Filter -4 AN x -4 AN, In-Line Billet
Aluminum, 140-Mircon
Filter -6 AN x -6 AN, In-Line Billet Aluminum, 140-Micron
Filter 1/4" NPT x -4 AN, Cheater, Pro-Fogger Filter 1/4" NPT x -6 AN, Big Shot
Filter 1/8” NPT x -4 AN, Powershot
Fuel Filter 1/8” NPT x -4 AN Fuel Filter 1/8” NPT x -6 AN
with kit). The pump runs off your shop’s compressed air and requires no electrical hook-up.
tiMe DelaY sWitch
• Allows you to activate a 2nd and 3rd stage of nitrous as a function of time. Delay in 10ths of a second to almost two minutes by setting small DIP switches.
NOS15838A Time Delay Switch (DIP Switch)
442
NOS14251 NOS14250 NOS14253
tools
PiPe taP
NOS15990
Nitrous Refill Pump Station
Regulator, Filter/Water Separator for Pump Station NO2 Transfer Pump
1/16" NPT Pipe Tap, Nozzle Tap, Required to
install all NOS Fogger Nozzles
tuBe BenDing tool
NOS15991 Used with 1/8” or 3/16” Tubing