Page 389 - VSI Master Catalog

DIFFERENTIALS
FORD 9” DIFFERENTIAL SHIM AND REPLACEMENT PARTS KITS
“BRUTE STRENGTH” DIFFERENTIAL
• Kits include hard-to-find items needed to assemble Ford 9” center sections
• Limited slip, not locked spool-types like the dragsters run to launch straight.
• The Brutes have extra-thick spring plates and chrome silicon springs that put over 800 lbs.
of preload on the disk packs.
• You’ll also get a more durable unit, because the Moroso piece has 22 friction discs, four more than stock.
• You won’t need a spacer when you install a performance gear.
Part # Description
MOR83000 Fits 1965-Later GM Cars with 12-Bolt Rear Axle and 30 Spline Axles
DRAG RACING TIRES
DS-2 FRONT TIRES
Part #
MOR84751
Description
Oval Track Kit Contains: Nine Pinion Retainer Shims Consisting of One Each .005”, .006”, .0075”, .0082”, Two .004”, and Three .0105”; Twelve Pinion Pre-load Shims Consisting of One Each .005”, .006”, .0075”, .0082”, .009”, .020”, .030”, Two .050” and Three .010”; One Pinion Spacer .375” Thick; and one 3/4” -20 Ford Pinion Nut.
• Aircraft inspired tread design offers reduced weight,minimal rolling resistance and high-speed stability.
• Asymmetrical tread pattern improves high-speed stability by reducing the tire’s tendency to “walk” at the top end.
• 4-ply nylon construction with high-strength bead provides added durability, especially during mounting and dismounting. • Ozone-resistant tire compound withstands the harmful effects of the sun and other environmental conditions.
• Tested to 300 MPH with 800 lb. load.
Approx
Tread
Recom.
Operating
Part #
Size (in)
Weight
Diam
Width
Rim Width
Pressure
Circum.
MOR17023
23.0 x 5.0 x 15
11 lbs.
23”
5”
3-1/2” - 6-1/2”
30 PSI.
72-7/16”
MOR17040 24.0 x 5.0 x 15 11 lbs. 24” 5” 3-1/2” - 6-1/2” 30 PSI. MOR17026 26.0 x 4.5 x 15 12 lbs. 26” 4.5” 3-1/2” - 5” 30 PSI.
DRAG SPECIAL FRONT TIRES
• Tubeless construction and 2-ply nylon cord helps to reduce unsprung weight.
• High cord angle and unique tread design reduce rolling resistance for increased speeds. • Shallow tread depth increases stability at high speeds.
• Stronger mounting bead withstands higher pressures when adjusting for roll-out.
MOR17100 7.10 x 15 11 lbs. 25-1/4” 4-1/8” 3-1/2” - 5” 30-35 PSI.
76-7/16” 81”
MOR17025
25.0 x 4.5 x 15
12 lbs.
25”
4.5”
3-1/2” - 5”
30 PSI.
78-1/4”
MOR17028
28.0 x 4.5 x 15
13 lbs.
28”
4.5”
3-1/2” - 5”
30 PSI.
86-3/8”
Approx
Tread
Recom.
Operating
Part #
Size (in)
Weight
Diam
Width
Rim Width
Pressure
Circum.
MOR17050
5.50 x 15
10 lbs.
25-1/4”
3-1/2”
3-1/2” - 4”
30-35 PSI.
78”
87-3/4”
MOR17600
7.60 x 15
13 lbs.
29-1/4”
4-5/8”
3-1/2” - 5”
30-35 PSI.
90-3/4”
WE STOCK A COMPLETE LINE OF
ASK A SALES ASSOCIATE OR GO TO MEYERDISTRIBUTING.COM FOR MORE!
387