Page 382 - VSI Master Catalog

PUSH-IN BREATHER/
OIL SEPARATOR
• No. 68781 is ideal for plumbing your
crankcase ventilation system into the air cleaner, while MOR68780 is a direct breather replacement for MOR25900 crankcase evacuation system.
• Uses internal foam disc and baffling to prevent oil
from entering air cleaner (MOR68781). Fits all valve covers with 1.22” holes; includes rubber grommet.
ULTRA 40 UNIVERSAL COIL WIRE KIT
• Allows installation of ignition coils
ULTRA 40 WIRE SETS
Over Valve Covers 90° Over Valve Covers 90° Under Headers 90°
• Optimized EMI/RFI resistance.
• At 8.65mm or 7mm in diameter and 40Ω of resistance
per foot, Moroso Ultra 40 Race Wire incorporates a
highly engineered spiral wound conductor.
• This maximizes energy transfer and minimizes electro
BLUE MAX SPIRAL CORE UNIVERSAL
FIT WIRE SETS
• Terminals and boots are factory installed on the spark plug
magnetic interference (EMI) and radio frequency (RF) interference noise.
in remote locations.
• Kit includes 72” wire, 2-HEI 90o distr.
boots, 2-HEI 90o spark plug boots, 4-HEI terminals, 2-Non-HEI 90o boots, 4-Non-HEI terminals and 2-coil boots.
MOR73237 Coil Wire Kit, Ultra 40, Universal 72”
MOR68780 MOR68781
Replacement Breather/Oil Separator, for MOR25900 Crankcase Evacuation System, 3/4” Hose.
Gold Iridite.
Replacement Breather/Oil Separator, 3/4” Hose, Chrome. For Street Use Only
BLUE MAX SPIRAL CORE SLEEVED WIRE SETS
• Complete with 8mm, 800Ω spiral
VALVE COVER WELD-IN BUNGS
• Can be welded to aluminum valve covers, holding tanks, cylinder heads, oil pans, etc. or wherever an NPT fitting is
needed.
• Made of 6061-T6 aluminum and fit a 1” diameter hole.
• Two per pack.
core wire pre-terminated at both
ends with the correct terminals and
boots, insulating sleeve that runs
the entire wire length, shrink tubing to seal the boots, and numbered ID tags.
• Complete, ready-to-install sets available for specific engines.
• Each wire is individually tested for continuity and resistance after termination to ensure race-ready performance.
MOR68900 MOR68910
Aluminum Weld-In Bungs, 3/8” NPT Fitting Aluminum Weld-In Bungs, 1/2” NPT Fitting
Dist. Terms
Non-HEI HEI-Style HEI-Style
HEI-Style HEI-Style
end of the wire with straight, 90°, or 135° ends.
• Wires are long enough so they can be cut to fit any engine. • Includes boots for both HEI and Non-HEI distributors.
• Each set includes enough terminals for either HEI or
8 Cylinder Engines
Plug Part # Configuration Terms
Small Block Chevy
MOR72400
MOR72402
MOR72407
Big Block Chevy
MOR72415 Over Valve Covers Straight MOR72416 Under Headers 90°
Universal Fit, 8.65mm
MOR73800 MOR73801 MOR73802 MOR73810 MOR73812 MOR73836 MOR73814 MOR73815 MOR73816
Custom Fit Sets, 7mm
MOR73536
MOR73537
MOR73811
Custom Fit Sets, 8.65mm
MOR73600 MOR73602 MOR73605 MOR73607 MOR73614 MOR73615 MOR73616 MOR73617 MOR73621 MOR73622 MOR73626
SBC, Over Valve Cover, 90° Plug, Non-HEI SBC, Over Valve Cover, 90° Plug, HEI SBC, Under Header, 90° Plug, Non-HEI SBC, Under Header, 90° Plug, HEI
BBC, Over Valve Cover, Straight Plug, Non-HEI BBC, Over Valve Cover, Straight Plug, HEI BBC, Under Header, 90°, HEI
BBC, Under Header, 90°, Non-HEI
BBC, Under Header, (Crab Cap) 90°, Non-HEI BBC, Under Header, (Crab Cap) 90°, HEI Ford 351W, 135°, HEI Style Cap, Oval Track
BLUE MAX COIL WIRE KIT
• All the parts necessary to make a coil wire to fit virtually all popular coils and distributor cap combinations.
• Kit contains three feet of Blue Max 8mm suppression wire, a wire stripping tool, and a 13-piece
boot and terminal kit.
MOR73235 Spiral Core 8mm, 800Ω Coil Wire Kit MOR72855 Solid Core Coil Wire Kit
90° Universal
Straight Universal
135° Universal
0° Universal, Red Straight Universal, Red 135° Universal, Red
90° Universal, Black Straight Universal, Black 135° Universal, Black
Non-HEI distributors.
LS-Series, Sleeved, 12.0” Wire Length
LS-Series, Sleeved, 9.75” Wire Length
Universal LS-Series Wire Kit, Unsleeved, 48” Lengths
Part #
MOR73225 MOR73217 MOR73219 MOR73231 MOR73226 MOR73218 MOR73232 MOR73220 MOR73233
Plug Distributor Wire Term/Boots Term/Boots Color
90° HEI & Non-HEI Blue
90° HEI & Non-HEI
90° HEI & Non-HEI Red 90° HEI & Non-HEI Black
Straight HEI & Non-HEI Blue Straight HEI & Non-HEI Red Straight HEI & Non-HEI Black
135° HEI & Non-HEI Blue 135° HEI & Non-HEI Black
Yellow
380