Page 274 - VSI Master Catalog

HUSHMAT
• HushMat Ultra (silver) is the highest performance and easiest to install vibration dampening, acoustic, and thermal insulation material available.
• Easy installation using only two basic tools - hands and scissors.
• Flexible material at a wide range from -30° to +400° F.
• No surface prep, no acetone, no alcohol wash, no heat guns to install. • Reduces resonant noise 0-1,000hz range.
Starter Kit
HMT10151
Door Kit
HMT10201
Trunk Kit
HMT10301
4 sq. ft., (4) 12.1” x 12” Silver Sheets
10 sq. ft., (10) 12.1” x 12” Silver Sheets
19.1 sq. ft., (10) 12.1” x 23” Silver Sheets
QUIET TAPE
• Quiet Tape is a proprietary butyl formula with a plastic film laminate.
Dash & Floor Kit
• Adhesion is guaranteed.
• Use quiet tape to secure wire
HMT10401
Bulk Kit
HMT10501
38 sq. ft., (20) 12.1” x 23” Sheets
(30) 12” x 23” Ultra Damping Pads - Black Foil
harnesses and cables to door panels, floor, trim panels, back of the headliner and vehicle side walls.
License Plate Kit
• Eliminate the nuisance noise caused by wire harnesses and cables rattling.
HMT10600
4” x 12” Ultra Vibration Dampening Pad with License Plate Frame Included
HMT30100 HMT30200
HEDDERS
• Designed for hardcore mid to high-RPM performance.
• Available for everything from street and strip to drag racing to pulling.
(5) 2” x 6” Strips 1” x 30' Roll
WELD-UP HEDDER KITS
• Kits include mandrel-bent 18-gauge seamless tubing, 3/8” thick flanges, collectors, gaskets, and bolts.
• Everything you need to assemble
a power-building set of custom headers.
HUS65600 HUS65630 HUS65640 HUS65642 HUS65645 HUS65670 HUS65672 HUS65675 HUS65676 HUS65680 HUS65681 HUS75645 HUS75673 HUS75678
55-95 SB Chevy, 1-3/4” Primary, 3” Collector 57-92 SB Chevy, 1-7/8” Primary, 3.5” Collector 65-00 BB Chevy, 2” Primary, 3.5” Collector
65-00 SB Chevy, 2” Primary, 3.5” Collector
57-92 SB Chevy, 2” Primary, 3.5” Collector, Slip Fit 65-00 BB Chevy, 2-1/8”” Primary, 4” Collector
SB Chevy, 2-1/8”” Primary, 4” Collector
65-00 BB Chevy, 2-1/4”” Primary, 4” Collector
65-00 BB Chevy, 2-1/4”” Primary, 4” Collector, Slip Fit 65-00 BB Chevy, 2 3/8” Primary, 4.5” Collector
65-00 BB Chevy, 2 3/8” Primary, 4.5” Collector, Slip Fit
BB Mopar, 2” Primary, 3.5” Collector, Slip Fit
BB Mopar, 2-1/8”” Primary, 3.5” Coll., Slip Fit, 5/16” Flange BB Mopar, 2-1/4”” Primary, 4” Coll., Slip Fit, 5/16” Flange
HUS65025 HUS65090 HUS65180 HUS65210 HUS65211 HUS65219 HUS85650
67-74 SB Camaro/Nova/Chevy II, Full Length, 2”
67-74 BB Camaro/Nova/Chevy II, Full Length, 2.25” 83-92 Camaro 5.0/5.7L, Full Length, 2”
83-92 SB Chev/El Cam/Malibu/Sprint, Full Length, 1-7/8” BB Chevy, Top Fuel Style Zoomie Headers
78-87 SB Malibu/Monte Carlo, Ceramic Coated, 1-7/8” Ford 429-460, Fenderwell, 1-3/4”
LS-ENGINE SWAP MOUNT KITS
• Designed for the installation of an LS series engine into a
early GM vehicle.
• Manual and automatic transmission kits available.
• Each kit contains engine mount pads, frame mounts, polyurethane bushings, crossmember, and all necessary Grade 8 mounting hardware.
an LS Series engine into earlier
HUS03825 HUS03831 HUS03838
272
78-87 Malibu/El Camino, 4L60-E/4L65-E Trans. 67-74 F/X-Body, 4L60-E/4L65-E Trans.
63-88 GM G-Body, 4L60-E/4L65-E Trans.
HUS45006 HUS45016 HUS45066 HUS45076
78-88 GM, Mid Length, Silver Ceramic Coated, 1-3/4” 78-88 GM, Full Length, Silver Ceramic Coated, 1-3/4” 67-69 Camaro/Firebird, Mid Length, Sil. Cer. Coated, 1-3/4” 67-69 Camaro/Firebird, Full Length, Sil. Cer. Coated, 1-3/4”
MUSCLE RODS LS ENGINESWAP HEDDERS • Designed for the installation of
model musclecars.
• Constructed from mandrel-bent,
18-gauge steel tubing and
available with black paint or
Hedman’s heat-resistant HTC finish, these headers come with gaskets and hardware.