Page 221 - VSI Master Catalog

BIG SWITCH AND LEVER KIT
• Rated at 250-amps continuous service and 2500-amp surge. Can be used on 12/16/24-volt systems. IHRA/NHRA approved sanctioning bodies.
BILLET DASH MOUNT WITH IGNITION KEY
• Relocate your ignition switch
FLAFR1002 FLAFR1003 FLAFR1003-2 FLAFR1010 FLAFR1009
COUPLERS
• Overall length is 2”. Outside diameter is 1”.
Billet Dual Mount with Ignition Key and Accessory
FLAFRIGN4 Mill Finish w/Key
Billet Mount with Ignition Key
FLAFRIGN3 Mill Finish w/Key
SELF-POWERED TIMING LIGHT
• Self battery-powered design, features a Xenon bulb, impact resistant plastic, work light, & power indicator light.
• Accurate up to 14,000 RPM.
FLAFR1940 FLAFR1943 FLAFR1945
3/4" X 9/16"-26 3/4" X 5/8"-36 3/4" DD X 3/4" DD
Timing Light, Self Powered
Little Switch with Mounting Bracket
Big Switch, 250AMP
Big Switch with Push/Pull Lever Kit Magneto/battery Big Switch (Switch Only) Removeable Key Switch
under the dash with this stylish billet aluminum mount. Ignition Switch and boot included.
FLAFR1001
KILL SWITCH
• Combination battery and alternator
kill switch. Rated at 150 amp continuous and 2000 amp surge.
• NHRA/SCCA approved sanctioning bodies. FLAFR1013 Kill Switch
OEM FACTORY STYLE DASH MOUNT
• Billet aluminum clamp can be used with virtually all OEM applications
to facilitate installation of a Flaming River Tilt Column in an existing dash.
FLAFR20114 2” Clamp MIL-SPECIFICATION UNIVERSAL JOINTS • Similar to military specification
POLISHED FLOOR MOUNT
• Billet aluminum ball and collar swivel floor mount simplifies column installation by allowing up to a 60° angle.
joints for aircraft and have
become the select choice of drag racers due to the lightweight design.
• Lubricant filled silicone boot provides maintenance free operation for extended universal joint life.
• This boot is designed for high temperature environments with a continuous rating of 650° F.
• Please note nominal size is outside diameter.
Specifications- Per Spec. MIL-J-6193A Nominal O.D.”A”
FLAFR20100 FLAFR20101
1-3/4" Mount 2" Mount
FLOOR MOUNT FIREWALL COVER
• Polished Aluminum Cover to finish the engine side of the floor mount. Conceals the screws for a finished touch.
I.D.”G” +.004 -.001 .750"
“D” Min. 1-1/16"
Min. Ult. Static Torque(In. Lbs.) 3500
Axial Tension
& Comp. (Lbs.)
3500
IMPORTANT: This is a lightweight application that is not designed for circle track, street, or highway use and not recommended for steering. Please see inch lbs torque rating mil-specifications listed in the chart to determine if this is suitable for your application. Ideal for shifter linkage. Not Recommended for Street Use.
FLAFR20100CVR
Firewall Cover
FLAFR1800B14
Max Dia. “J” +/-1/64 1-1/2
Size (IN.) O.D.
7/8"
Length “B” +/-1/64 3-5/8"
+.000 -.002 .870"
“C” Min. 1"
STEERING WHEEL ADAPTERS
• Billet aluminum steering wheel adapter with GM 9-bolt pattern. Polished finish. Adapter is designed to fit Flaming River column diameter.
Performance- Per Spec. MIL-J-6193A “H” Wt.
FLAFR20113
9-bolt Pattern for FR Column
Tensional Play Max Degrees .36
Endurance Torque Test* Torque (In. Lbs.)
450
FLAFR1800B14
+/-1/64 (Lbs)
15/16" .314
219