Page 192 - VSI Master Catalog

PolyurEthaNE sWay Bar BushINGs
• Replacing stock stabilizer bar bushings with polyurethane increases handling power due to less bushing deflection and quicker response time provided by the firmer material.
• Measure your bar diameter before ordering to insure a perfect fit. 2 per pkg. Please specify black or red
when ordering.
Non Greaseable set (Not recommended for full-size Pickups)
Gm ls-sErIEs motor CoNVErsIoN sEts
• These conversion plate and mount sets are designed to allow you to easily transplant an LS-Series motor into where an early conventional style three bolt motor was. The set includes two Hyperflex polyurethane mounts, plates and hardware.
ENG9-5105 ENG9-5106 ENG9-5107 ENG9-5108 ENG9-5109 ENG9-5110 ENG9-5111 ENG9-5112 ENG9-5113 ENG9-5125 ENG9-5126
11/16” or 17.5mm 3/4” or 19mm 13/16” or 20.5mm 7/8” or 22mm 15/16” or 24mm 1” or 25mm 1-1/16” or 27mm 1-1/8” or 28.5mm 1-1/4” or 31.5mm 21mm
7/8” or 22mm
ENG3-1147 ENG3-1148 ENG3-1149 ENG3-1150
Chrome Finish Incl. Short & Wide Mount (3.1115) Zinc Finish Incl. Short & Wide Mount (3.1114) Chrome Finish Incl. Tall & Narrow Mount (3.1118) Zinc Finish Incl. Tall & Narrow Mount (3.1117)
motor aND traNsmIssIoN mouNt sEts
• Includes 2 Motor Mounts & 1 Transmission Mount
Gm Cars and 2WD trucks
formula 5 PrEluBE
• Formula 5 Prelube is a versatile, waterproof, non-melting grease containing PTFE. Formula 5 Prelube forms a tough, durable, chemical resistant film of lubricant that prevents metal-tometal contact even under severe shock loads Only a small amount is required to properly lubricate and prevent corrosion.
ENG3-1120
ENG3-1130
ford 4.6 V8
ENG4-1124
Zinc Finish, Contains (2) ENG3-1114, and (1) ENG3-1108
Zinc Finish, Contains (2) ENG3-1116, and (1) ENG3-1108
84-95, Motor & Trans. Mount Set
uNIVErsal tIE roD Dust Boots
• At last it is now possible to re place a dust boot without having to buy a new tie rod!!! These HYPER-FLEXTM polyurethane dust boots resist damage from rocks, road salt, sand, water and are impervious to undercar fluids. Each has a unique 5-point sealing action design that prevents loss of lubricants and contamination— the major cause of rod wear. Choose either round or octagon.
GrEasEaBlE sWay Bar BushINGs
• Introducing new greaseable universal sway bar bushings! Complete with zerk fittings and a unique channel design that allows grease to migrate to all inner bushing surfaces. Virtually eliminates any possible binding, even under extreme pressures created by large diameter bars.
Greaseable set (Not recommended for full-size Pickups)
“the Quiet ones’’
ENG9-13101 ENG9-13103
ENG9-13105 ENG9-13119
Round, 19/32”/15mm I.D., 1 3/8”/35mm O.D. Round, 31/64”/12mm I.D.,
1 13/64”/30.5mm O.D.
Round, 9/16”/14 mm I.D., 1 7/16”/36.5mm O.D. Round, 21/32” I.D.,1 5/8”/41.3mm O.D.
2 per pkg. Please specify black or red when ordering.
5/8” or 16mm 11/16” or 17.5mm 3/4” or 19mm 13/16” or 20.5mm 7/8” or 22mm 15/16” or 24mm 1” or 25mm 1-1/8” or 28.5mm 1-1/4” or 31.5mm
shoCk BushINGs
• HYPER-FLEXTM performance polyurethane shock bushings give any shock maximum efficiency while extending its life.
• They last for ever and add to the per for mance of every shock, giving instant response and control to the suspension. Available in red or black.
ENG9-5154
ENG9-5155
ENG9-5156
ENG9-5157
ENG9-5158
ENG9-5160
ENG9-5161
ENG9-5164
ENG9-5165
Greaseable set (Common Gm truck style)
ENG9-8101 ENG9-8107 ENG9-8108 ENG9-8113 ENG9-8116
Fits Shock Tower (Bayonet End Style)
7/8” Nipples. 3/8” I.D., 1-1/4” O.D., 5/8”
Thick. 4 Grommets Per Set.
Fits Standard Hour - Glass Shaped Eye
5/8” I.D., 1” Min./11/8” Max. O.D., 1-7/16” Long. 2 Bushings Per Set.
Fits Standard Hour - Glass Shaped Eye
3/4” I.D., 1” Min./ 11/8” Max. O.D., 1-7/16” Long. 2 Bushings Per Set.
Half Bushings for Hourglass Style. 5/8” I.D.,
1” Min./ 1-1/8” Max. O.D., 11/16” Long.
4 Halves Per Set.
Fits Standard Straight Eye 5/8” I.D.,
11/16” O.D., 1-7/16” Long. 2 Bushings Per Set.
ENG9-11104 ENG9-11110
8 oz. Tub
1/2 oz. Squirt Tubes (Quantity 3)
ENG9-5169 ENG9-5171 ENG9-5172 ENG9-5173
1-1/16” or 27mm 1-3/16” or 30mm 1-1/4” or 31.5mm 1-3/8” or 35mm
hEaVy Duty END lINk sEt
• Fits most domestic cars, mini trucks and import models that use a conventional style end link system.
Set includes: 8 grommets and 8 heavy gauge washers.
ENG9-8105 3/8” I.D., 11/16” Nipple O.D., 1 1/8” O.D.
190