Page 153 - VSI Master Catalog

THUNDER T1 DELAY BOX
CO2 SHIFTERS
• Uses a large solenoid for fast, positive shifting, and no modifications are necessary for installation.
DEDAS1K CO2 Shifter Kit 3SP
TRANS BRAKE SWITCHES
• Lighted keypad and display
• NHRA-approved for use in all
electronic classes.
• Four different delay modes:
Cross-Talk, Crossover,
Interface, and Delay. Tap up/
down button. Input for remote dial-in board display. Independent line lock output. Adjustable transbrake with lockout protection.
DEDT1 Thunder T1 Delay Box
REACTION TIME DELAY BOX
• Feature push-button thumb- wheels with a range of 0.000- 9.999 seconds, and full voltage through the boxes, with no voltage drops to the transbrake.
• A toggle switch to bypass boxes completely.
• Can handle any transbrake up to 45 amps. DEDRTD7 Reaction Time Delay Box
NITROUS OXIDE CONTROLLERS
• Operates up to 4-stages of Nitrous Oxide, along with providing outputs to retard the ignition at the same time.
• Includes a combination multi-speed RPM shift/ 4-stage timer output to shift the car by RPM or time or to run any other device a racer needs.
DEDNOC1 4-Stage Nitrous Controlles
IRIDIUM SPARK PLUGS
• Adjustable to suit driver feel, the heavy-duty 1/2” button allows full current to reach the transbrake solenoid. Only 100th of an
inch release travel (half the travel of
• Ultra fine .04mm diameter Iridium Electrode that is a tapered cut electrode improves firing performance by reducing quenching.
• U-Groove has been cut inside the ground electrode to maintain the large spark volume. • 360° laser welding process seals the electrode and resists wear even in the
harshest conditions. Silicone oil coating on the insulator protects the surface from moisture and carbon build-up.
Thread Hex Heat
other buttons) for quick, consistent reaction times.
DEDPBSRTD Trans Brake Button
DEDPBSXL
Trans Brake Button, X-Large
SHIFT TIMER
• Used to activate air shifters, electric shifters, or even a single stage nitrous system.
• Push-button thumb wheel for quick, easy settings from 0.00-9.99 seconds.
• Quartz crystal timing, simple wiring diagrams for easy hookup, and 12Vand 16V compatibility.
DEDST1 Shift Timer
ELECTRIC SHIFTER
• Designed specifically for the drag strip.
• They include an electric shifting solenoid, and the necessary mounting brackets and hardware.
DEDSS5 Electric Shifter Solenoid
Part # Dia (mm) Reach IK Series
14mm Gasket Seat, Projected Tip DENIK20 14mm .750” DENIK22 14mm .750”
IT Series
14mm Taper Seat, Projected Tip
DENIT16 14mm .708” DENIT24 14mm .708”
Size Range
5/8" Hot 5/8" Medium
5/8" High Heat 5/8" Medium/Cold
151