Page 12 - VSI Master Catalog

BILLET NITROUS /FUEL SOLENOID BRACKET KIT • Mounts any single nitrous/fuel
ALUMINUM FUEL CELLS
• Our fuel cells feature a flat bottom and are foam filled.
• 0-90Ω sending unit.
solenoid using stainless
steel hardware.
• Easily mounts to the carburetor studs
BEP11205 BEP11210
5 Gallon Fuel Cell 10 Gallon Fuel Cell
on Holley 4150/4160 or 4500 Dominator
series carburetor.
• Hard clear anodized finish protects from corrosion. • Sold as a pair.
BEP16105 BEP16115
Holley 4150/4160, Pair Holley 4500 Dominator, Pair
ASSEMBLED NITROUS FEED LINES
• Each line is made from a PTFE core stainless steel line with crimped on ends with either blue (nitrous)
or red (fuel) fittings crimped on and tested to ensure there are no leaks.
WIDE OPEN THROTTLE MICRO SWITCH AND MOUNTING BRACKET • Fits multiple apps including Holley
HP & non-HP series carbs.
• Includes stainless steel mounting
Blue Lines
BEP35000 BEP35001 BEP35002 BEP35003 BEP35010 BEP35011 BEP35012 BEP35013 BEP35014 BEP35015 BEP35016 BEP35019 BEP35020 BEP35021
Blue Lines (Continued)
hardware for the micro switch as
BEP35023 BEP35050 BEP35051 BEP35052 BEP35053 BEP35055 BEP35057 BEP35058
Red Lines
BEP35101 BEP35110 BEP35111 BEP35112
well as for mounting the bracket. • Black anodized finish.
-3 AN x 8.5” -3 AN x 12” -3 AN x 18” -3 AN x 24” -4 AN x 8.5” -4 AN x 12” -4 AN x 18” -4 AN x 24” -4 AN x 3’ -4 AN x 4’ -4 AN x 6’ -4 AN x 12’ -4 AN x 14’ -4 AN x 16’
-4 AN x 20’ -6 AN x 12” -6 AN x 24” -6 AN x 4’ -6 AN x 6’ -6 AN x 10’ -6 AN x 14’ -6 AN x 16’
-3 AN x 12” -4 AN x 8.5” -4 AN x 12” -4 AN x 18”
Grip Range
1.12” - 1.25” 1.50” - 1.64” 1.63” - 1.88” 1.88” - 2.12” 2.13” - 2.37” 2.44” - 2.75” 2.69” - 3.00” 3.31” - 3.63” 3.63” - 3.94” 4.12” - 4.44” 4.81” - 5.12” 5.25” - 5.56”
BEP16200 BEP16210
WOT & Bracket, Holley 4150 / 4160 WOT & Bracket, Holley 4500 Dominator
DOMINATOR SHEAR PLATES
• Designed to build low pressure under the throttle plate and help the vacuum signal to the carburetor booster.
• CNC-machined from 6061-T6 billet aluminum, and available in two bore sizes.
• Hard clear anodized finish protects from corrosion.
BEP10950 BEP10951
Dominator Shear Plate 2.000” Bore Dominator Shear Plate 2.125” Bore
STAINLESS STEEL T-BOLT CLAMPS
• Feature full-round edges that
THROTTLE CABLE BRACKET AND RETURN SPRING KIT
• Stainless steel throttle cable mounting
prevent damage to delicate tubing and hoses. Also include an upgraded one-piece stainless steel trunnion.
bracket is used for a clean hot
BEP37000 BEP37001 BEP37002 BEP37003 BEP37004 BEP37005 BEP37006 BEP37008 BEP37010 BEP37012 BEP37014 BEP37016
Description
T-bolt Clamp 1.00” T-bolt Clamp 1.25” T-bolt Clamp 1.50” T-bolt Clamp 1.75” T-bolt Clamp 2.00” T-bolt Clamp 2.25” T-bolt Clamp 2.50” T-bolt Clamp 3.00” T-bolt Clamp 3.50” T-bolt Clamp 4.00” T-bolt Clamp 4.50” T-bolt Clamp 5.00”
rod-performance look.
• Mounts to carburetor stud.
• Dual stainless steel return springs.
• For use with Big End S/S Throttle Cable Assemblies.
BEP11041
Throttle Cable Bracket Kit
S/S THROTTLE CABLE ASSEMBLY
• PTFE inner liner and stainless braided outer covering.
• Aluminum ends with threaded nut assembly to mount through the
firewall and on the throttle cable bracket.
• Aluminum clevis and swivel throttle stud fits all carburetors and most throttle bodies.
• Two lengths for any application. • Universal, trim-to-fit.
BEP11046 24” (Fits Most Single Carburetors)
BEP11047 36” (Fits Most Tunnel Ram, Blower, & EFI Apps)
10
NITROUS DISTRIBUTION BLOCKS
• These distribution blocks are machined from 6061 billet aluminum and feature
(1) 1/8” NPT inlet and (4) 1/8” NPT outlets.
BEP35510 BEP35515
Dist. Block, Blue Dist. Block, Red